Catalogs >
Orbitec GmbH >
OSK 13 S data

OSK 13 S data
1Pages

Catalog excerpts

ENCLOSED WELD HEADS OSK 13 S Enclosed weld heads provide complete inert gas protection of the full weld bead circumference (an industry requirement for producing welded joints in electro-polished and hygienic applications). Collets are required for each tube diameter to be welded. Cold wire feed is not possible. Welding will be made after preparation of the tube ends to provide a ﬂat, square face. During welding the weld head remains static, only the rotor carrying the electrode rotates in an ‘orbital’ motion around the tube (90° saw cut, if necessary square off). Advantage: Compact size for use in restricted space environments. Welding equipment MICROFIT WELD HEAD OSK 13 S Gas-cooled weld head for applications with extreme narrow space requirements as e.g. in the semiconductor industry. Specially designed to weld micro-ﬁttings. Unique construction, including speciﬁcally directed gas routing to improve gas coverage and material selection resulting in a high duty cycle even without water cooling. Saws / tube squaring devices · Extreme narrow / compact design · Simple design allows easy to maintain · Weld Head compatible with control element (start/stop kit with status display) · Arc Machines Model 9-500 cassettes will ﬁt too Weld head type: OSK 13 S | Orbital welding Orbital welding tools system Item number Tube size Range mm inch Weight OD 3.17 – 12.7mm | 0.125“ – 0.500“ | 2.4kg OSK 13 S MICROFIT CLAMPING CASSETTE For welding with extreme narrow space requirements · Orbitec TCA clamping cassette, width 12mm (0.472inch) · Clamping cassette compatible with Arc Machines, model 9-500 · Cassette can be mounted in either direction (left or right hand) Service / warranty Measurement devices Purge accessories Dimension Sheet Encl

Open the catalog to page 1