1. Catalogs
  2. Orbital Research Ltd.
  3. Orbital X-MIC External Reference X-Band LNB with Internal Isolator

Orbital X-MIC External Reference X-Band LNB with Internal Isolator

Orbital X-MIC External Reference X-Band LNB with Internal Isolator

Orbital X-MIC External Reference X-Band LNB with Internal Isolator

Product catalog summary
Product Overview: The Orbital Research X-MIC X-Band low noise block downconverter (LNB) is designed for ruggedized military satellite communications (SATCOM) applications, offering high data throughput, signal amplification, and reliability in extreme conditions. Key features include an internal isolator, a built-in 55 dB transmit reject filter, a switching power supply, reduced size, weight, and power (SWAP), excellent impedance matching, and superior linearity.
Applications: Primarily used for military satellite terminals, the X-MIC can also be tuned for earth observation applications and is suitable for use on moving vehicles or aircraft.
Technical Specifications:
  • Frequency Range: RF Frequency Band: 7.25 to 7.75 GHz; IF Frequency Band: 950 to 1450 MHz; Bandwidth: 500 MHz; Local Oscillator: 6.3 GHz.
  • Noise and Stability: Noise Figure: 0.8 dB typical; LO Stability and Phase Noise: Locked to external reference.
  • 10MHz Reference: Insertion via input connector; Input Level Range: -5 to +5 dBm.
  • VSWR: Input VSWR: 1.3:1 nominal; Output VSWR: 2.0:1 nominal.
  • Gain: Gain: 62 +/- 2.0 dB over temperature; Flatness: +/- 1.5 over full band; Ripple: +/- 0.5 over any 10 MHz; Stability: +/- 1.0 over 24 hours at 25°C.
  • Environmental: Operating Temperature: -40°C to +60°C; Non-Operating Temp Range: -50°C to +70°C; Humidity: 100% condensing; MTBF: > 125,000 hours; Standards: RoHS, REACH, MIL-STD-810F for vibration, IP67.
  • Mechanical: Weight: 750 grams; Dimensions: 146 x 70 x 55 mm; Input Connector: WR-112; Output Connector: N, SMA.
  • Power: Current Draw: 3.8 W; Input Voltage Range: +12 to +20 VDC; Power supplies must meet 100 mV maximum ripple and noise.
  • Options: Extended Temperature Range; Custom Gain Temperature Compensation.
  • Other Specs: Image Rejection: 60 dBc min; 1dB Compression: +15 dBm min; OIP3: +25 dBm min; Desense Level: -40 dBm transmit signal results in <0.1 dB of NF degradation; Transmit Rejection: 55 dB; Overdrive Power Level: -20 dBm (Non-Damaging).
Note: Specifications are subject to change without notice.
See more

Catalog excerpts

Orbital X-MIC External Reference X-Band LNB with Internal Isolator-1

orbital RESEARCH X-LNB with built-in isolator outline drawing Description The Orbital Research X-MIC X-Band low noise block downconverter (LNB) provides exceptional performance for ruggedized military satellite communications (SATCOM) applications. The X-MIC delivers maximum data throughput, signal amplification and reliability - even in extreme operating conditions. • Internal Isolator ensures exceptional performance in any weather • Built-in 55 dB Transmit Reject Filter minimizes need for external filters • Switching Power Supply for maximum operating efficiency • Reduced SWAP (Size, Weight and Power) for real estate optimization • Excellent Impedance Matching means Low Phase Noise, minimal Bit Error Rate (BER) • Superior Linearity leads to maximum throughput This X-Band external reference LNB is primarily used for military satellite terminals but it can also be tuned for earth observation applications. In addition to standard fixed satellite terminals, it can be used on top of moving vehicles or aircraft. To order or for more detailed information, please contact us at [email protected] | 604.419.8585 | orbitalresearch.net

 Open the catalog to page 1
Orbital X-MIC External Reference X-Band LNB with Internal Isolator-2

Orbital X-MIC External Reference X-Band LNB with Internal Isolator Specifications FREQUENCY RANGE RF Frequency Band (GHz) IF Frequency Band (MHz) Bandwidth (MHz) Local Oscillator (GHz) Noise Figure (dB) LO Phase Noise Band Switching Locked to external reference Locked to external reference N/A MECHANICAL Weight (grams) 750 Input Voltage Range +12 to + 20 VDC 1 Power supplies must meet 100 mV maximum ripple and noise Input Level Range (dBm) OPTIONS Extended Temperature Range Custom Gain Temperature Compensation VSWR Input VSWR Output VSWR OTHER SPECS GAIN_ Gain (dB) Operating Temperature Non-Operating...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.