*mydirectindustry

omp3820151

Product catalog summary

Overview: The OMP 38 is a stabilized power source designed for sensor power supply, housed in a plastic box with a terminal board for DIN rail installation. It features LEDs on the transmitter face to indicate operational status.

Operation: The device includes a switch for setting output voltage located on the lower edge of the instrument.

Specifications:

Output: Adjustable to 5/12/24 VDC or 5/15/24 VDC with current and heat protection. Output options include:
- A: 5 VDC/450 mA; 12 VDC/300 mA; 24 VDC/150 mA
- B: 5 VDC/450 mA; 15 VDC/240 mA; 24 VDC/150 mA
Tolerance is ±0.25 V, regulation is ±0.1 V, ripple is less than 50 mVpp, and outage span is greater than 200 ms. Efficiency is 63%.
Power Supply: Operates within 80…250 V AC/DC, 50/60 Hz, with a maximum of 5.7 VA and power factor ≥ 0.4. Input frequency ranges from DC to 47…63 Hz, with input current between 100…45 mA. Starting current is less than 20 A for less than 1.5 ms. Protected by an internal fuse (T630mA).
Mechanical Properties: Made from PA 66, incombustible UL 94 V-I, blue. Dimensions are 113 x 98 x 22 mm, designed for installation on a 35 mm wide DIN rail.
Operating Conditions: Connection via connector terminal board with section less than 2.5 mm². Stabilization period is within 5 minutes after switch-on. Operating temperature ranges from -20° to 60°C, and storage temperature from -20° to 85°C. The cover is rated IP20.
Safety and Compliance: Complies with EN 61010-1, A2 for electrical safety, with dielectric strength of 4 kVAC after 1 minute between supply and output. Insulation resistance is suitable for pollution degree II, measuring category III. EMC compliance is per EN 61326-1, and seismic capacity is per IEC 980: 1993, par. 6.

Catalog excerpts

OMP 38 OMP 38 The OMP 38 is a stabilized source for sensor power supply. The source is in a plastic box with terminal board to DIN rail. On the face of the transmitter there are LEDs, which indicate the operation status of the source. ADJUSTABLE STABILIZED SOURCE TO DIN RAIL OUTPUT 5/12/24 VDC, 5/15/24 VDC CURRENT AND HEAT PROTECTION POWER SUPPLY 80…250 V AC/DC OPERATION Switch for the setting of output voltage is located on the lower edge of the instrument

Open the catalog to page 1

TECHNICAL DATA OUTPUT OPERATING CONDITIONS Output: A - 5 VDC/450 mA; 12 VDC/300 mA; 24 VDC/150 mA B - 5 VDC/450 mA; 15 VDC/240 mA; 24 VDC/150 mA (adjustable by a switch on the box) Tolerance: ±0,25 V Regulation: ±0,1 V Ripple: < 50 mVpp Outage span: > 200 ms Efficiency: 63 % Functions: active current restriction as per selected range, overstepping the restriction is signalled by red LED Connection: connector terminal board, section < 2,5 mm2 Stabilization period: within 5 minutes after switch-on Working temperature: -20°…60°C Storage temperature: -20°…85°C Cover: IP20 El. safety: EN 61010-1,...

Open the catalog to page 2

All Orbit Merret s.r.o. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list