Low Center Motors Catalogue EN

A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and three-phase asynchronous electric motors. It has an annual capacity of more than 1 million motors and 5 million electric stators with an annual turnover of approx 235 million euro and more than 1600 workers in 15 production facilities. The group, established in 1971 by Leone Donazzan, chaired today by his son Armando Donazzan, is strongly focused on technological innovation, performance and customization to meet individual clients requirements....

Low Center Motors The range of Low Center Motors is particularly suitable for applications where high power is required with limited axle height compared to the range of motors UNEL -MEC. They are produced in three phase (ET) and single phase versions (EM), 2 and 4 pole. (6 pole on demand). This range is also designed for inverter duty use, for applications where it is necessary to vary the motor frequency to reach speeds greater than 3000 rpms. In building these Low Center Motors, CEG uses only the highest quality components and highest grade materials. Housings have been redesigned. The new...

Performance DataLEGEND Size Duty to be defined with the Technical Dept. depending on the application of the motor. For the variation with brake, please, contact your company reference.

Performance Data ETSTD

ORANGE1 Electric Motors Spa - Low Center Motors

*Flange IEC 63 available on demand. P= 090 N= 060 M= 075 ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors

*Flange IEC 80 available on demand. P= 0120 N= 080 M= 0100 ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors

*Flange IEC 80 available on demand. P= 0120 N= 080 M= 0100 ORANGE1 Electric Motors Spa - Low Center Motors 11

ORANGE1 Electric Motors Spa - Low Center Motors

*Flange IEC 80 available on demand. P= 0120 N= 080 M= 0100 ORANGE1 Electric Motors Spa - Low Center Motors

Terminal Box Position Sign 14 ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors 15

Low Center Motors can be equipped with a Direct Current Brake (FPC). Brake motor external sizes are equal to those of the corresponding standard motors (see pages 6-13). This brake is particularly suitable for applications where progressive braking is required. Without any power applied, the shaft is locked in compliance with all existing safety laws and standards. The direct current brake is a single friction face brake with maximum reduced noise level and maximum STANDARD FEATURES safety standards. The brake works because of the force exerted by the springs. By taking the electromagnet-supply...

Electric Data ETFPC ORANGE1 Electric Motors Spa - Low Center Motors

Speed Range Inverter Drive The Low Center Motors are manufactured by means of advanced technology and high quality material. They are suitable for inverter applications. Using angular contact ball bearings makes the Low Center Motors especially applicable to applications with axial loads and applications that require highspeeds. The nominal torque of a self ventilated motor with inverter is lower at low frequency and at high frequency. It is lower at low frequency for thermal reasons due to fan's lower speed. It is lower at high frequency for electrical reasons due to the de-fluxing. The diagram...

Electric Data ETSTD © n max: maximum allowed speed with standard bearings. On Demand specific bearing are available for much higher speed. ORANGE1 Electric Motors Spa - Low Center Motors

UL-CSA Certification UL products for USA market are identify by file no E176350. CSA products for CA market are identify by file no LR109925-1. ATEX CEG's products can be self certify according to categories ATEX 3GD, area 2 - 22 Voltage / Special frequency The winding is developed according to the voltage/frequency of the network and the application / inverter's set-up. Insulated Phases Special winding, recommended for inverter use. Class H insulation Winding insulation increase of 20°C the maximum temperature, compared to F class. Double impregnation The double impregnation better compact coil...

ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors 23

ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors 25

ORANGE1 Electric Motors Spa - Low Center Motors

ORANGE1 Electric Motors Spa - Low Center Motors

Administrative Headquarter follow us o@oo Piazza della Repubblica 28 20124 - Milano Italy Production plants Via Angelo Messedaglia 4 32030 - Arsie (BL) Italy T. +39 0439 750067 F. +39 0439 750070 Via A. Grandi 23 47030 - San Mauro Pascoli (FC) Italy T. +39 0541 815611 F. +39 0541 815684 & JTmttoc. rame J3f> inHnn mnKnn SICMEMOTORI I BRIXIA PRESS