^^OptrOnFor loads till 3kW infrared-heat for shortwave IR-modules without build-in fan Type PLD 1.3 for ohmic loads till 3kW. For stepless control of ohmic consumers. The phase angle control is primarily used for quick running pathes / production processes. Because by using a pulse group control there can be unwanted output power fluctuations (flicker). • stepp- and lossless IC-control, hysteresis free control • Soft-start • powder-coated metal housing • external heatsink • schuko socket for IR-module connection • 1.8 m mains cable • illuminated ON/OFF-switch • rotary potentiometer with collethead and mechanical end stops Technical Data: Mains connection: Supply voltage: Output power: Load type: Control range: Control principle: Consumer connection: Housing: Protection class: Dimensions: Weight: Ambient temperature: Storage temperature: Safety standards: EMC standards: Attention: Order-no.: 1.8 m mains cable with schuko plug 230 V AC (47 ... 63 Hz) constant load max. 3kW ohmic consumer typical 10 . 230 V AC flickerfree phase control schuko socket aluminium diecast, black powder-coated, protection class 1 IP50 (without schuko socket), not for moist areas 120 x 200 x 80 mm (WxHxD) 1.3 kg -20° ... +40°C -40° ... +85°C EN 60950-1:2006 EN 55014-1:2006; EN 61000-6-2:2005; EN 61000-3-2:2006 EN 61000-3-3:1995 + A1:2001 + A2:2005 The device is only destined for professional use ! 131915 All prices excl. VAT — July 2016 All pictures are approximations OPTRON GMBH • Steinriede 12 • D-30827 Garbsen / Hannover • Germany Phone: +49 (0)5131 7083 - 0 • Fax.: +49 (0)5131 7083 - 25 www.optron-gmbh.de • e-mail: [email protected]