Power controller For mediumwave, nonventilated IR-modules Stepless and lossless controls, VDE and CE certified The pulse group control is assembled for the power controlling of the mediumwave IR-modules. This principle allows a simple construction and is therefore a low-cost alternative to a phase angle contol. Through the inertia of the connected IR-modules the often annoying flimmer effect is nearly eliminated. Type ILS3-10 M Output power: Working principle: Output adjustment range: Mains connection: Consumer connection: Casing: Protection class: Other features: Dimensions ( W x H x D): Weight: Item number: ILS3-10 M max. 10 kW (max. 3 x 16 A) pulse group control 0 … 100% by front-sided scale potentiometer or external 0 ... 10 V DC signal (switchable by terminal connections) 2 m connecting cable with 16 A CEE plug; 3x 400 V + N + PE (50/60 Hz) Attention: 3 phases needed internal terminal connection (3 cable glands on the back for max. 3 consumer); 3 x 230 V or 3 x 400 V (50/60 Hz) aluminum lacquered (RAL7035 light grey), aluminum anodised (frontplate) IP 20 noise suppression class A for industrial sectors IEC 60947-4-3, IEC 61000-4-2; ventilated heat sink on the back; mains switch front-sided 260 x 145 x 345 mm approx. 5 kg 131921 All prices excl. VAT – July 2016 Documentation last updated: 11.05.2016 OPTRON GMBH • Steinriede 12 • D-30827 Garbsen / Hannover • Germany Phone: +49 (0)5131 7083 - 0 • Fax.: +49 (0)5131 7083 - 25 www.optron-gmbh.de • e-mail: mail@opt