Moisture Probe - Double electrode
2Pages

Moisture Probe with 2-pin lectrodes and short-circuit cut-out for use with pin and surface electrodes messtech This electronic moisture probe is perfectly suited for the dtection of wet spots below vehicle carpets and in car body cavities (with surface electrode). A false alarm through contact with conductive objects within the body work is ruled out. An extrem robust body is mark of this moisture probe. Without delay, any wet spot will be announced with 4 LED indicators and an additional audible signal. Through a simple change of electrodes this versatile tool can be used for both penetration and surface measurements. Without switch-on, the moisture probe is ready for operation immediately after charging. The electrodes can be short-circuited with fingers, charging socket 驗 charge control LED serving a simple and effective functional test. The built-in lithium ion accumulator is dimensioned for a continous operation of approx. 30 to 40 hours. The recharging effects through the supplied charger. For this purpose, connect the moisture probe over the charging socket m with the charger. The green charge control LED signalizes the charging. Charging period: 3 to 5 hours The charging electronic cut-off automatic, as soon as the accumulator is fully charged and the green charge control LED go out. The LED for the power indicator is located in the cap as 5th red LED. When the power indicator lights up, the device should be loaded. The electrodes are fitted with plug-in connections for easy replacement in case of wearout. Simply loosen the screw (hex nut), exchange the electrodes, tighten the screw connection and you're done. Dimensions: 042mm; lenght without electrodes 185mm Weight: approx. 420g (without holder and charger) Safety note: For intended use only !!! Item No.: Description 9900015 Moisture probe with 2-pin electrodes, short-circuit cut-out, 4 LED display and sound signal, rechargeable battery, incl. national charger (EU), holder and 2-pin electrode (item no. 9900064) 9900021 Surcharge for optional charger with changeable plug for EU, US and UK 100 ... 240 VAC (national charger not applicable) 9900064 2-pin electrode 32mm (02,0mm) in plastic holder with connection plug 9900048 2-pin electrode 40mm (02,0mm) in plastic holder with connection plug 9900051 2-pin electrode 55mm (02,5mm) in plastic holder with connection plug 9900052 2-pin electrode 80mm (02,5mm) in plastic holder with connection plug 9900055 Surface electrode - conical version, flexible (length: ~420mm) 9900061 Surface electrode - extremely flat version, flexible (length: ~300mm) 9900060 Screw connection for electrodes (hex nut) 9900028 Protective cap (screw-on) minimum order quantity for 2-pin electrodes: 10 units All prices excl. VAT - Jan-10 All pictures are approximations -> z:\publishingdaten\prospekte\geraete+komponenten\tragbar\feuchtefuehler\doppelelektroden\feuchtefuehler_doppelelektroden_eng.doc Documentation last updated: 12.10.2009 OPTRON GMBH Steinriede 12 Օ D-30827 Garbsen / Hannover Germany Phone : +49 (0)5131 7083 - 0 Օ Fax. : +49 (0)5131 7083 - 25 www.optron-gmbh.de Email: mail@optron-gmbh.de

Moisture Probe 2-Pin lectrodes incl. plastic holder and connection plug Length: 32mm - pin 02,0mm - item no. 9900064 Length: 40mm - pin 02,0mm - item no. 9900048 Length: 55mm - pin 02,5mm - item no. 9900051 Length: 80mm - pin 02,5mm - item no. 9900052 (other lengths available on request) Surface Electrode - conical version Surface probe with conical electrode mounted on flexible shaft for measuring in hard-to-reach areas, such as cavities etc. Electrode head diameter: front 10mm, back 16mm Length, total: ca. 420mm Item no. 9900055 Surface Electrode - extremely flat version Sensor with flat,...