I R Spot Short Wave Infrared Module The infrared spot works in the short wave infrared spectral rgion which has the advantage of a high penetration depth of the radiation energy. Focussing of the infrared radiation energy at a focal length of 50mm. ► Power 150W ► 100% power within 1-2 seconds ► No heat-up time or cooling-off period ► On-line power adjustment while in use through the power controllers ► Focal length 50mm ► Focal spot diameter 10mm ► Protective quartz glass plate ► 1,5m connecting cable ► Any position of installation possible ► Low weight, approx. 500g (excl. cable) ► Operating voltage: 17V~, 9A IR spot with optional clamp joint The infrared module is ventilated by an integrated fan, therefore no need of further protective measures to be used in industrial environments, even when in permanent use. Fixation effects through a slot nut (M6) in the profile rail of the infrared module. The highest energy density is achieved at the focal point (see diagram back side). However, focussing can also made outside the focal point, resulting with the effect of extension of the irradiation area as well as a reduction of the intensity. Item item number IR spot; 150W; 17V~; focal length 50mm with 1,5m connecting cable with Harting connector 600.5100.1 Spare infrared emitter incl. reflector 600.5111 Transformer 204VA (for max. one IR spot); 230V AC / 17V~ / 12A 600.5119 Desktop with transformer and Harting connectors, ready for connection for one IR spot, incl. transformer and DC supply for fan, without power controller, dimensions 260x90x180mm (WxHxD) 600.5116 Desktop (like item 600.5116) however with integrated power controller, frontside potentiometer, dimensions 260x90x240mm (WxHxD) 600.5117 Option external cut on/off by 24V DC signal for controller with item 600.5117 600.5120 Desktop (like item 600.5116) however with integrated power controller and power control by external signal 0...10VDC 600.5118 Switching power supply (12V DC - 420mA); air supply for max. one IR spot 600.5121 Adjustable, lockable clamp joint for fixation of the infrared module 600.5113 Desktops are also available for the connection of several IR spots (on request) All prices excl. VAT - Jan-11 Z:\Publishingdaten\prospekte\infrarotstrahler\strahler\ir-spot\ir-spot_eng.doc All pictures are approximations Documentation last updated: 09.11.2010-38

I R Spot Short Wave Infrared Module On the back, the desktops have a mains connection with power connector (mains incl. in the delivery contents), as well as Harting sleeves (4 pol + PE) for the connection of the IR spots. The external 0-10 V DC-signal (item no. 600.5118) are also supplied on the back through a Harting connector (3 pol + PE). At the desktops with integrated power controller, the heat output of the IR spots can be adjusted stepless and flicker-free. Focus position 50mm 100mm All prices excl. VAT - Jan-11 Z:\Publishingdaten\prospekte\infrarotstrahler\strahler\ir-spot\ir-spot_eng.doc...