IR Spot Short Wave Infrared Module
3Pages

IR Spot Short Wave Infrared Module The infrared spot works in the short wave infrared spectral region with the advantage of a high penetration depth of the radiation energy. Focussing of the infrared radiation energy at a focal length of 50 mm. ► Power 150W (17V, 9A) ► 100% power within 1-2 seconds ► No heat-up time or cooling-off period ► On-line power adjustment while in use by our power controllers ► Focal length 50 mm - with additional reflector 17 mm ► Focal spot diameter 10 mm - with additional reflector Ø 6 mm ► Protective quartz glass plate IR spot with optional clamp joint ► 1.5 m connecting cable ► Any position of installation possible ► Low weight, approx. 500 g (excl. cable) The infrared module is ventilated by an integrated fan. So there is no need of further precaution when used in industrial environments, even when in permanent use. Fixation is done by the use of a slot nut (M8) in the profile rail of the infrared module. The highest energy density is achieved at the focal point (see diagram back side). The IR-Spot can be used outside the focal point also with the effect of increasing the irradiation area as well as a reduction of the intensity. Item IR spot; 150W; 17V; focal length 50mm with 1.5m connecting cable with Harting connector Desktop with integrated power controller and Harting connector ready for connection of one IR-Spot, incl. switching power supply and supply for the fan, stepless and flicker-free adjustment of the heating power via potentiometer or through an external 0 - 10 V DC signal, mains supply via two-pin grounded plug, dimension (w x h x d): 260 x 90 x 240 mm Desktop without power controller, but with an external ON/OFF-signal (24 V DC) and load current control (potential-free contact), dimension (w x h x d): 260 x 90 x 240 mm (You can find automatic control desktops in the “datasheet power controller with automatic regulation”) Accessories / spare parts Spare infrared emitter (average lifetime 750h) Adjustable, lockable clamp joint for fixation of the infrared module Switching power supply 230 V AC / 17 V DC / 18 A for power supply of the IR-spots (max. 2 IR-spots, rec. 1 IR-spot) PWM – power controller module 17 V DC / 15 A for power adjustment of the IR-spot (max. 1 IR-spot) All prices excl. VAT – August 2019 Documentation last updated: 14.08.2019

IR Spot Short Wave Infrared Module Additional reflector (inside gold plated) for reduction of the spot focal point diameter to Ø 6 mm with increased power density (factor 4) IR spot with mounted additional reflector version B Positions of the focal point IR-Spot without additional reflector IR spot with additional reflector version B and protective glass Additional reflector version B: - with protective glass and optimised cooling item-no.: 600.5124 price: Alignment assistance for version B to detect the position of the focal point item-no.: 600.5125 price: - Alignment assistance Average...

IR Spot Short Wave Infrared Module Dimensions IR-Spot (basic version) rear side front side back side All prices excl. VAT – August 2019 Documentation last updated: 14.08.2019 OPTRON GMBH • Steinriede 12 • D-30827 Garbsen / Hannover • Germany Phone : +49 (0)5131 7083 - 0 • Fax. : +49 (0)5131 7083 - 25 www.optron-gmbh.de • e-mail: mail@optro