IR-Modules for line focussing These Optron IR emitters work with shortwave IR frequencies with high penetration depth. Highest-possible performance built into the smallest possible space ! With this models nearly the whole infrared energy is focused by a parabolic or elliptic gold reflector to a line. Other features:  100% power within 1-2 seconds, no preheating or cooling time.  on-line power adjustment with short response time by our power controllers.  highest power density at focus., depending on the reflector type 6 ... 30 W/cm².  line focus with focal distances of approx. 50 ... 60 mm (parabolic) or 10 mm (elliptic).  4 press nuts (M6) at the back for assembly  low housing temperature by integrated fan  temperature overheat protection  universal mounting position 4 press nuts (M6) for assembly at the back [dimensions in mm] IRD S380G – 1x 1 kW / 230 V (50/60 Hz), gold reflector, parabolic (F approx. 50 … 60 mm), max. power density 6 W/cm² IRD S380G – 1x 2 kW / 230 V (50/60 Hz), gold reflector, parabolic (F approx. 50 … 60 mm), max. power density 12 W/cm² IRD S380G – 1x 1 kW / 230 V (50/60 Hz), gold reflector, elliptic (F approx. 10 mm), max. power density 20 W/cm² IRD S380G – 1x 2 kW / 230 V (50/60 Hz), gold reflector, elliptic (F approx. 10 mm), max. power density 30 W/cm² All models are delivered with 2m connection cable for terminal connection. All prices excl. VAT – July 2016

4 press nuts (M6) for assembly at the back [dimensions in mm] IRD S250G - 1x 1.2 kW / 230 V (50/60 Hz), gold reflector, parabolic (F approx. 50 ... 60 mm), max. power density 11.5 W/cm2600.1098 IRD S250G - 1x 1.2 kW / 230 V (50/60 Hz), gold reflector, elliptic (F approx. 10 mm), max. power density 38 W/cm2 600.1099 IRD S810G - 1x 3 kW / 400 V (50/60 Hz), gold reflector, parabolic (F approx. 50 ... 60 mm), heated length 715 mm, max. power density 7 W/cmF 600.1095 IRD S810G - 1x 4 kW / 400 V (50/60 Hz), gold reflector, parabolic (F approx. 50 ... 60 mm), heated length 715 mm, max. power density...