*mydirectindustry

Catalogs
Optris GmbH & Co. KG
optris CTvideo 1M / 2M

optris CTvideo 1M / 2M

Product catalog summary

Overview
The optris® CTvideo 1M/2M is an advanced infrared temperature measurement device designed for precise non-contact temperature measurement of metals and ceramics ranging from 250 °C to 2200 °C. It features adjustable focus, a patented crosshair laser, and video sighting for enhanced accuracy and ease of use.

Key Features

Simultaneous use of video sighting and crosshair laser for easy sensor alignment, capable of measuring spots as small as 0.5 mm.
Manual focusing for measurement distances starting from 90 mm with an optical resolution of up to 300:1.
Fast response times starting from 1 ms.
Operable in ambient temperatures up to 70 °C without cooling, with automatic laser switch-off at 50 °C.
Short measuring wavelengths (1.0 μm or 1.6 μm) reduce errors on surfaces with low or unknown emission rates.
Compact Connect software for quick sensor setup, video alignment, and real-time process monitoring.

General Specifications

Environmental rating: IP 65 (NEMA-4).
Ambient temperature range: -20 °C to 70 °C for the sensing head, -20 °C to 85 °C for electronics.
Storage temperature: -40 °C to 85 °C.
Relative humidity: 10 – 95%, non-condensing.
Vibration and shock resistance: 3 G and 50 G respectively.
Weight: Sensing head 600 g, Electronics 420 g.

Electrical Specifications

Outputs: 0/4 – 20 mA, 0-5/10 V, thermocouple J, K.
Alarm output: 24 V/50 mA (open collector).
Digital output: USB 2.0, Ethernet (via optional USB server).
Video sighting: Digital (USB 2.0) 640 x 480 px.
Power supply: 8 – 36 V DC.

Measurement Specifications

Temperature ranges: Various scalable ranges from 250 °C to 2200 °C depending on the model.
Spectral ranges: 1.0 μm (1M) / 1.6 μm (2M).
Optical resolution: 150:1 or 300:1 depending on the model.
System accuracy: ± (0.3% of reading + 2 °C).
Repeatability: ± (0.1% of reading + 1 °C).
Temperature resolution: 0.1 K.
Exposure time: 1 ms (90%).

Optical Parameters

Standard focus (SF) and Close focus (CF) optics available.
Measurement spot sizes and distances vary based on the model and focus type.

Additional Features

Automatic snapshots for process control and documentation.
Graphic display and recording of measurement values.
Remote control capabilities.

Connection Modes

24 V DC or Power over Ethernet (PoE).

Contact Information
Optris GmbH, Ferdinand-Buisson-Str. 14, 13127 Berlin, Germany. Tel.: +49 (0)30 500 197-0, Email: [email protected], Website: www.optris.global

Catalog excerpts

CTvideo 1M/2M Precise non-contact temperature measurement of metals and ceramics from 250 °C to 2200 °C with adjustable focus, patented crosshair laser and video sighting innovative infrared technology

Open the catalog to page 1

optris® CTvideo 1M/2M TECHNICAL DATA Features: • Parallel use of video sighting and crosshair laser for easy sensor alignment (measuring spots up from 0.5 mm) under all viewing conditions possible • anual focusing for measurement distances M from 90 mm with optical resolution up to 300:1 • esponse times up from 1 ms R • sable in up to 70 °C ambient temperature without U cooling and automatic laser switch off at 50 °C • Short measuring wavelengths of 1.0 μm or 1.6 μm decrease measuring mistakes on surfaces with low or unknown emission rate • ompact Connect software for fast on-site sensor setup...

Open the catalog to page 2

The vario optics of the CTvideo allows a smooth focusing The sensors are available in two versions: of the optics to the desired distance. Standard focus (SF): 200 mm till infinity Close focus (CF): 90 mm till 250 mm The following tables show examples of measurement distances and the corresponding measurement spot sizes: Meas. spot size in mm Meas. distance in mm Meas. spot size in mm Meas. distance in mm Software included Automatic snapshots (time- or temperature dependent) to control and document the process Graphic display and recording of the measurement values Setup of sensor parameters...

Open the catalog to page 3

optris® CTvideo 1M/2M TECHNICAL DATA Specifications are subject to change without notice · CTvideo 1M 2M-DS-E2018-08-A Dimensions sensing head Dimensions electronics Optris GmbH Ferdinand-Buisson-Str. 14 13127 Berlin · Germany Tel.: +49 (0)30 500 197-0 Fax: +49 (0)30 500 197-10 Email: [email protected] www.optris.global innovative infrared technology

Open the catalog to page 4

All Optris GmbH & Co. KG catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list