Non-contact temperature measurement through flames from 200 °C to 1650 °C Features: • Accurate temperature measurement through flames in the range from 200 °C to 1650 °C to monitor workpieces inside ovens (heated with fire), to measure inside chemical reactors and to observe the brick temperature in combustion chambers • Double laser aiming marks real spot location and spot size up from 1.6 mm at any distance • Optics 45:1 with selectable focus, compact sensor head size • Usable up to 85 °C ambient temperature without cooling and automatic laser switch off at 50 °C Cooling and protection accessories for harsh environmental conditions Measurement specifications General specifications Environmental rating Ambient temperature11 Storage temperature Relative humidity Vibration (sensor) Shock (sensor) Weight IP 65 (NEMA-4) -20 °C ... 85 °C (sensing head, 50 °C with laser ON) -20 °C ... 85 °C (electronics) -40 °C ... 85 °C (sensing head) -40 °C ... 85 °C (electronics) 10 - 95 %, non condensing IEC 68-2-6: 3 G, 11 - 200 Hz, any axis IEC 68-2-27: 50 G, 11 ms, any axis 600 g (sensing head) / 420 g (electronics) Electrical specifications Outputs / analog Output / alarm 0/4 - 20 mA, 0 - 5/ 10 V, thermocouple J, K 24 V / 50 mA (open collector) Temperature range (scalable via programming keys or software) Spectral range Optical resolution (90 % energy) System accuracy (at ambient temp. 23 ±5 °C) Repeatability (at ambient temp. 23 ±5 °C) Temperature resolution (digital) Exposure time4) (90 % signal) Emissivity/ Gain (adjustable via programming keys or software) Transmissivity/ Gain (adjustable via programming keys or software) Optional Outputs / digital Output impedances Inputs Cable length Power Supply Current draw Laser 635 nm Relay: 2 x 60 V DC/ 42 V ACeff; 0.4 A; optically isolated USB, RS232, RS485, CAN, Profibus DP, Ethernet (optional) mA max. 500 Q (with 5 - 36 V DC) mV min. 100 kQ load impedance thermocouple 20 Q Programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions) Signal processing (parameter Peak hold, valley hold, average; extended hold adjustable via programming function with threshold and hysteresis keys or software, respectively) Software optris® Compact Connect 1 The functioning of the LCD display may be limited in ambient temperatures below 0 °C 2) For object temperatures above >300 °C 3) s = 1, response time 1 s 4With dynamic adaptation at low signal levels 3 m (standard), 8 m, 15 m 8 - 36 V DC Max. 160 mA 1 mW, ON/OFF via electronic box or software Optris GmbH ■ Ferdinand-Buisson-Str. 14 ■ 13127 Berlin ■ Germany Phone: +49 (0)30 500 197-0 ■ Fax: +49 (0)30 500 197-10 ■ E-mail: [email protected] ■ www.optris.global

Chart SF optics, D:S = 45:1 Further optics, D:S = 45:1 Dimensions Sensing head Electronics Accessories (examples) Mounting angle, adjustable in two axes (ACCTLAB) Cooling housing (ACCJCTL) Mounting angle for cooling housing, adjustable in two axes (ACCJAB) Water cooling and air purge for sensing head (ACCTLW + ACCTLAP) Mounting device for cooling housing (ACCTLRM) Specifications are subject to change without notice ■ CTlaser MT-EN2018-08-A