optris® CTlaser G5 TECHNICAL DATA Infrared thermometer with laser visor for temperature measurements on glass from 100 °C to 1650 °C Features: • recise temperature measurements on glat glass, container glass, light bulbs, car P glass and solar pannels • emperature ranges from 100 °C to 1650 °C, measurement fields from 1.0 mm T and exposure time 10 ms • Innovative double laser visor for exact marking of measuring field • Compact size of sensing head • Suitable for ambient temperatures of up to 85 °C without additional cooling • Cooling and protection accessories for rugged environments Measurement specifications Temperature range (adjustable via programming keys or software) Spectral range General specifications Environmental rating Optical resolution (90 % energy) –20 °C ... 85 °C (sensing head, 50 °C with laser ON) –20 °C ... 85 °C (electronics) System accuracy2) (at ambient temp. 23 ±5 °C) Storage temperature – 40 °C ... 85 °C (sensing head) – 40 °C ... 85 °C (electronics) Repeatibility (at ambient temp. 23 ±5 °C) Relative humidity Temperature resolution 600 g (sensing head) / 420 g (electronics) Emissivity / Gain (adjustable via programming keys or software) Transmissivity (adjustable via programming keys or software) Signal processing (parameter adjustable via programming keys or software, respectively) Peak hold, valley hold, average; extended hold function with threshold and hysteresis optris® Compact Connect Electrical specifications Outputs / analog Output / alarm Relay: 2 x 60 V DC/ 42 V ACeff; 0.4 A; optically isolated USB, RS232, RS485, CAN, Profibus DP, Ethernet (optional) Output impedances mA max. 500 Ω (bei 5 – 36 V DC) mV min. 100 kΩ load impedance thermocouple 20 Ω Programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions) Cable length Power supply Current draw 1 mW, ON/OFF via electronic box or software The functioning of the LCD display may be limited in ambient temperatures below 0 °C 2) ε = 1, response time 1 s 3) Whichever is greater 4) With dynamic adaptation at low signal levels 1) Optris GmbH · Ferdinand-Buisson-Str.

Optical specifications Additional optics, D:S = 45:1 Dimension Electronics Accessories (examples) Mounting angle, adjustable in two axes (ACCTLAB) Water cooling and air purge collar for sensing head (ACCTLW + ACCTLAP) Mounting device for cooling housing (ACCTLRM) Specifications are subject to change without further notice · CTlaser G5-EN2018-08-A Sensing head