optris® CTlaser F2/F6 TECHNICAL DATA Non-contact temperature measurement of CO2 and CO flame gases up to 1650 °C Features: • ccurate temperature measurement of CO2 (F2) or CO (F6) flame gases in the A range of 200 °C up to 1650 °C in combustion processes, garbage burning or processes inside chemical reactors • Double laser aiming marks real spot location and spot size up from 1.6 mm at any distance • Optics 45:1 with selectable focus, compact sensor head size • Usable up to 85 °C ambient temperature without cooling and automatic laser switch off at 50 °C • Cooling and protection accessories for harsh environmental conditions • Calibrated under inert gas atmosphere (Argon) Measurement specifications Temperature range (scalable via programming keys or software) Spectral range General specifications Optical resoution (90 % energy) System accuracy (at ambient temp. 23 ±5 °C) Repeatability (at ambient temp. 23 ±5 °C) Temperature resolution Environmental rating –20 °C ... 85 °C (sensing head, 50 °C with laser ON) –20 °C ... 85 °C (electronics) Storage temperature – 40 °C ... 85 °C (sensing head) – 40 °C ... 85 °C (electronics) Relative humidity Vibration (sensor) Shock (sensor) 600 g (sensing head) / 420 g (electronics) Emissivity / Gain (scalable via programming keys or software) 0.100 – 1.100 Transmissivity (scalable via programming keys or software) Relay: 2 x 60 V DC/ 42 V ACeff; 0,4 A; optically isolated USB, RS232, RS485, CAN, Profibus DP, Ethernet (optional) Output impedances Programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions) Cable length Power Supply Current draw 1 mW, ON/OFF via electronic box or software Electrical specifications Signal processing (parameter adjustable via programming keys or software, respectively) Peak hold, valley hold, average; extended hold function with threshold and hysteresis optris® Compact Connect functioning of the LCD display may be limited in ambient temperatures below 0 °C 2) At ambient temperatures >300 °C 3) ε = 1, response time 1 s 4) Whichever is greater 5) With dynamic adaptation at low signal levels Optris GmbH · Ferdinand-B

Optical specifications Further optics, D:S = 45:1 Dimensions Sensing head Mounting angle, adjustable in two axes (ACCTLAB) Cooling housing (ACCJCTL) Water cooling and air purge for sensing head (ACCTLW + ACCTLAP) Mounting angle for cooling housing, adjustable in two axes (ACCJAB) Mounting device for cooling housing (ACCTLRM) Specifications are subject to change without notice · CTlaser F2/F6-E2018-08-A Accessories (examples)