Catalogs >
Optris GmbH & Co. KG >
optris CTlaser 3M

optris CTlaser 3M
2Pages

Catalog excerpts

optris® CTlaser 3M TECHNICAL DATA Non-contact temperature measurement with precise aiming from 50 °C to 1800 °C Features: • ccurate temperature measurements of metals, secondary metal processing A and ceramic materials • Double laser aiming marks real spot location at any distance • Optical resolution up to 300:1 with selectable focus • emperature ranges from 50 °C to 1800 °C, with selectable focus Temperature T ranges from 50 °C to 1800 °C, measuring spots up from 0.7 mm and response times up from 1 ms • Usable up to 85 °C ambient temperature without cooling • Short measuring wave length of 2.3 μm reduces error of temperature readings on surfaces with low or unknown emissivity Measurement specifications Temperature range2) (scalable via programming keys or software) General specifications Environmental rating Spectral range –20 °C ... 85 °C (sensing head, 50 °C with laser ON) –20 °C ... 85 °C (electronics) Optical resolution (90 % energy) Storage temperature – 40 °C ... 125 °C (sensing head) – 40 °C ... 85 °C (electronics) System accuracy4) (at ambient temp. 23 ±5 °C) Relative humidity Repeatability (at ambient temp. 23 ±5 °C) Vibration (sensor) Shock (sensor) 600 g (sensing head) / 420 g (electronics) Temperature resolution (digital) Exposure time5) (90 % signal) Emissivity/ Gain (adjustable via programming keys or software) Transmissivity/ Gain (adjustable via programming keys or software) Signal processing (parameter adjustable via programming keys or software, respectively) Peak hold, valley hold, average; extended hold function with threshold and hysteresis optris® Compact Connect Electrical specifications Outputs / analog Relay: 2 x 60 V DC / 42 V ACeff; 0.4 A; optically isolated USB, RS232, RS485, CAN, Profibus DP, Ethernet (optional) Output impedances mA max. 500 Ω (with 5 – 36 V DC) mV min. 100 kΩ load impedance thermocouple 20 Ω Programmable functional inputs for external emissivity adjustment, ambient temperature compensation, trigger (reset of hold functions) Cable length Power Supply Current draw functioning of the LCD display may be limited in ambient temperatures below 0 °C 2) T object >Tsensing head +25 °C 3) Specification valid at T object ≥ start of measurement range +50 °C 4) ε = 1, response time 1 s 5) With dynamic adaptation at low signal levels 1 mW, ON/OFF via electronic box or software

Open the catalog to page 1