Group: Schunk Group
Catalog excerpts
Product Catalogue Consumables Precision Optics Smart Solutions for Professionals Smart Solutions for Professionals
Open the catalog to page 1Smart Solutions for Professionals
Open the catalog to page 2Introduction: OptoTech Consumables & Tooling The best machines and systems can only provide top performance if the tools and consumables are ideally matched to the process. OptoTech’s range of consumables provides you with a comprehensive solution for all of your applications. All of our products have been extensively tested and specially matched to our machines and systems. Some of our tool concepts are unique. thus underscoring the cutting-edge technology of our processes. Optimised production is only made possible by combining our machines with high-quality tools and consumables. Our...
Open the catalog to page 3Coolant KE 500 KE 500 is a mineral oil free water soluble coolant for processing optical glass with diamond tools. Technical Data Colour: Viscosity (20°C): pH-Value: Refractometer factor: Concentration: Comment KE 500 is free from phenols, nitrite, silicone and PCB/PCT, PTBB as well as other dangerous and/or raw materials with labelling obligation. Further advantages of KE 500 are: high corrosion protection low foaming good machine care very environmentally-friendly good skin tolerance Packing units on request Art. No.: KM-28-0002 Also available: Compatible de-foamer Art. No.: KM-28-0001...
Open the catalog to page 4Coolant Fluid G44 Fluid G 44 is a full synthetic, mineral oil free water soluble coolant for processing ceramics, flat-, optical- and crystal glass. It can also be used for processing steel and non iron metals like copper. Technical Data Colour: Viscosity (20°C): pH-Value: Refractometer factor: Concentration: Comment Fluid G 44 is free from chlorine, phenols, nitrite, silicone, PCB/ PCT and PTBB as well as other dangerous and/or raw materials with labelling obligation. Further advantages of Fluid G 44 are: high economic low foaming good rust protection and cooling impact good rinsing good...
Open the catalog to page 5Coolant Fluid G 46 Fluid G 46 is a full synthetic, mineral oil free water soluble coolant for processing ceramics, flat-, optical- and crystal glass. It can also be used for processing steel and non iron metals like copper. Technical Data Colour: Viscosity (20°C): pH-Value: Refractometer factor: Concentration: Comment Fluid G 46 is free from chlorine, phenols, nitrite, silicone, PCB/ PCT and PTBB as well as other dangerous and/or raw materials with labelling obligation. Further advantages of Fluid G 46 are: high economic low foaming good rust protection and cooling impact good rinsing good...
Open the catalog to page 6Coolant Leko-Fluid 16 DL Leko-Fluid 16 DL is a full synthetic, mineral oil free water soluble coolant for processing ceramics, flat-, optical- and crystal glass. It can also be used for processing steel and non iron metals like copper. Developed to improve the processing of quartz glass at lowest possible concentrations (3 %). Technical Data Colour: Viscosity (20°C): pH-Value: Refractometer factor: Concentration: Comment Leko-Fluid 16 DL is free from chlorine, phenols, nitrite, silicone, PCB/PCT and PTBB as well as other dangerous and/or raw materials with labelling obligation. Further...
Open the catalog to page 7Centering Oil ZO 100 / ZO 500 S ZO 100 is a high performance coolant oil for generating and centering precision optics with diamond tools. Technical Data Colour: Viscosity (40°C): Flashpoint: Art. No.: KM-22-0002 ZO 500S is a high performance coolant oil for generating and centering precision optics with diamond tools. Technical Data Colour: Viscosity (40°C): Flashpoint: Comment ZO 500S is free from phenols, PCB/PCT, PTBB, chlorine zinc and barium. Further advantages of ZO 500S are: • good skin tolerance • low foaming • little mist formation • high efficient • good sedimentation Packing...
Open the catalog to page 8PU-Foil Our polyurethane foil perfectly suits for polishing precision lenses, ophthalmic lenses, flat optics or ceramic surfaces. The Polyurethane, which is made up of millions of porosities, is also available as drenched material. The drenching enhances the action and increases stock removal, while minimizing free particles that can contribute to scratching. Even with the drenched material it requires the usage of polishing slurries like cerium- or zirconium oxide. Dimensions: Standard Sheet: 1400 mm x 580 mm Standard Thickness: 0.51mm; 0.81mm On request: 1.02 mm; 1.27mm 2.03 mm; 3.18 mm;...
Open the catalog to page 9Novotext Novotext is a high performance polishing ground based on textile fibre strengthened duroplast which is very suitable for polishing micro optics (Radius 1 mm to 7 mm). This easy to handle rod shaped material is available in different diameters: Individual sizes and dimensions on request. Novotext & Synthetic Resin Novotext is useable with all kind of polishing slurry types. Art. No.: 01013300000635 Art. No.: 01013300001270 Art. No.: 01013300001300 Art. No.: 01013300001500 Art. No.: 01013300001905 Art. No.: 01013300002540 Art. No.: 01013300003000 Art. No.: 01013300003180 Art. No.:...
Open the catalog to page 10Polishing Pitch Polishing material based on natural resin for polishing precision optics. Our Polishing pitch is available in three degrees of hardness: soft, medium hard and hard. soft - 23 medium - 27 hard - 37 hard - 43 Polishing Wax Polishing wax made of natural materials such as beeswax, colophonium and paraffin. This polishing wax can be used for many optical applications, e.g. for polishing plano-surfaces and for cementing lenses and prisms. Ideal for stress-free cementing of complex lenses and prisms. Melting point: approx. 60 to 70°C Art. No.: KK-17-3202 Art. No.: KK-36-0001 medium...
Open the catalog to page 11Cerox / Opaline Cerox 1663 is a rare earth oxide based powder particularly suited for polishing ophthalmic lenses (mass production and prescription) and optical glass. This product provides excellent suspension characteristics, a high polishing efficiency and high cleanliness. Technical Data: pH-value: Colour: Particle size: Opaline is an extremely pure (white) cerium oxide compound. Strict control over the entire critical parameters (hardness, shape, size, and allocation) make Opaline the perfect choice for high precision polishing of all types of glass materials that require a critical...
Open the catalog to page 12All OptoTech catalogs and technical brochures
-
Catalogue Consumables Metrology
42 Pages
-
Consumables Ophthalmics
24 Pages
-
Catalogue Consumables Coating
32 Pages
-
HSP 200
2 Pages
-
UPG 2000 CNC
4 Pages
-
UPG 1500 CNC
2 Pages
-
MCG 500 / 1000 CNC
2 Pages
-
UPG 1000 CNC
2 Pages
-
SMP 800 CNC
2 Pages
-
MCG 500 CNC Compact
2 Pages
-
SM 501 CNC
2 Pages
-
SMP 501 CNC-2C
2 Pages
-
UPG 500 CNC
2 Pages
-
MCG 250 CNC Compact
2 Pages
-
ASM 300 CNC-TC
2 Pages
-
PKS 250 CNC
2 Pages
-
ASM 100 CNC-TC
2 Pages
-
SM 201 CNC-TC
2 Pages
-
SMP 201 CNC TwinCut-3C
2 Pages
-
SM 150 CNC-TC
2 Pages
-
SM 130 CNC-TC
2 Pages
-
SM 60 CNC-TC
2 Pages
-
SM 30 CNC-TC
2 Pages
-
OAC-25 Plus
2 Pages
-
OAC-90 plus
2 Pages
-
OAC-60
2 Pages
-
OAC-60F
2 Pages
-
MSI 300
2 Pages
-
OWI 150 XT invers
2 Pages
-
AZP 200 HP
2 Pages
-
OWI Desktop 60 mm
2 Pages
-
FLASH store
2 Pages
-
ESM Twin-A
2 Pages
-
DZM 20 CNC
2 Pages
-
SPX 30 NC
2 Pages
-
PPM 301 CNC
2 Pages
-
MCG 150 CNC
2 Pages
-
MCP 150 CNC 6-Axis
2 Pages
-
WZM 150 CNC
2 Pages
-
ASP 80 Twin-A
2 Pages
-
CDM 400 CNC
2 Pages