Low Noise Micro Spectrometer GENERAL DESCRIPTION Optical configuration: crossed Czerny-Turner Linear low noise CMOS detector with 2048 pixel Supply voltage: DC 5V (USB Power) Interface: USB2.0 (High speed) 20-pin connector for interfacing to external products Biochemical analyzer ATP2000P micro spectrometer is a low noise high-performance, miniature fiber-optic Spectrometer. Its sensor is a 2048 pixel CCD which responds from 200-1100 nm. ATP2000P is perfect for fast detection attribute to its high A/D converter frequency and the high speed data transmission. In ATP2000P memory chip, some algorithms to improve the performance are programed solidly, such as wavelength calibration coefficients, linearity coefficients. It output the spectrum data to PC through USB 2.0 or RS232 interface. ATP2000P operates with a single +5VDC supply supplied from USB or duo-pin interface Transmittance detection Reflectance detection Product data information is current as of publication data. Products conform to specifications per the terms of Optosky Standard warranty. Copyright © Optosky Technologies, 2015 Floor 22th, Creative Bld., 1300 Jimei Ave, Jimei, Xiamen, 361005

Datasheet 1 Specifications Detector Type Detectable range Effective pixel Pixel dimension Sensitivity Dark noise Optical Parameter Wavelength range Optical resolution Signal-to-noise Dynamic range Stray light Working temperature Working humidity Optical Configuration Optical Design Focal Distance Incidence slit Incident Interface Linear array detector 200-1100 nm 2048 14μm×200μm 1300 V/(lx·s) 13 RMS @ 13 ˚C 200-1100 nm 0.2-5 nm >1800:1 8.5 x 107 (system); 2000:1 for a single acquisition <0.05% at 600 nm; <0.09% at 435 nm o -25-50 C < 90%RH f/4 crossed asymmetrical Czerny-Turner 40 mm for incidence...

图 2 The sensitive of ATP2000P/ATP2000H (Red) vs ATP2000 (Black) Product data information is current as of publication data. Products conform to specifications per the terms of Optosky Standard warranty. Copyright © Optosky Technologies, 2015 Floor 22th, Creative Bld., 1300 Jimei Ave, Jimei, Xiamen, 361005, China Tel: +86-592-61025

SMA905 Female Fiber interface The size of ATP2000 micro spectrometer Product data information is current as of publication data. Products conform to specifications per the terms of Optosky Standard warranty. Copyright © Optosky Technologies, 2015 Floor 22th, Creative Bld., 1300 Jimei Ave, Jimei, Xiamen, 361005, China Tel: +

4 Electrical Pin-out Table 1 Electrical Characteristics Power Supply Operating voltage range Operating current Logic Inputs(3.3V LVTTL, Five-volt tolerant) High level input voltage Low level input voltage Logic Output(3.3V LVTTL) High level output voltage Low level output voltage The module is equipped with a 20-pin male angled box header(2x10, 2.00 mm pitch) and USB2.0 B type interface. The 20-pin connector is a Samtec part # STMM-110-02-L-D-RA connector. The mate to this is a Samtec part # TCSD-10-D-XX.XX-01-N. Table 2 Electrical Pin-Out Pin# Function Description LVTTL output the lamp enable...

Datasheet Output LVTTL output the continues strobe signal. LVTTL input the trigger signal. LVTTL output the single strobe signal. The SPI Clock signal for communications to other SPI peripherals The SPI Master Out Slave In (MOSI) signal for communications to other SPI peripherals The SPI Master In Slave Out (MISO) signal for communications to other SPI peripherals The SPI Chip/Device Select signal for communications to other SPI General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. General Purpose Software Programmable Digital Inputs/Outputs, LVTTL Logic. General Purpose...

Basic type The high performance version Product data information is current as of publication data. Products conform to specifications per the terms of Optosky Standard warranty. Copyright © Optosky Technologies, 2015 Floor 22th, Creative Bld., 1300 Jimei Ave, Jimei, Xiamen, 361005, China Tel: +86-592-610258