Axicons a|Axicons asphericon’s exclusive selection of 1“ and 2“ axicons have a superior surface roughness and can be used for high performance UV-applications. Also available as mounted axicons. Key Benefits: = Outstanding surface form deviation of RMSi < 0.07 µm = Suitable for high-power laser applications = Laser induced damage threshold: 12 J/cm², 100 Hz, 6 ns, 532 nm = Off-the-shelf delivery = RoHS compliance = Available with 4 standard coatings1: A: RMAX< 1.0%, RAVG≤ 0.4%, 400-600 nm, AOI=0° B: RMAX< 1.0%, RAVG≤ 0.4%, 600-1050 nm, AOI=0° C: RMAX< 1.0%, RAVG≤ 0.4%, 1000-1600 nm, AOI=0° X: RMAX< 1.0%, RAVG≤ 0.4%, 240-380 nm, AOI=0° Unmounted Axicon Lens description Surface Form Deviation (RMSi)2 Surface Imperfections Diameter Tolerance Center Thickness Tolerance Clear Aperture Product Code Edge Thickness Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica Fused Silica 1 Custom coatings on request. | 2 RMSi corresponds to ISO 10110-5 (surface form tolerances). | 3 Prices valid per piece. | 4 Conical tip, Clear Aperture 2.3 - 23 mm, smaller conical tips on request. | 5 Conical tip, Clear Aperture 4.6 - 46 mm, smaller conical tips on request. | General: Technical parameters and prices are subject to change without prior notice. OptoSigma Corporation 3210 South Croddy Way | Santa Ana, California 92704 | USA | Tel: 949-851-5