043-102118 CYLINDER INSPECTOR QUICKTEST
043-102118 CYLINDER INSPECTOR QUICKTEST
The CylinderInspector QuickTest with C-Mount is a 2D optical inspection system designed for fast and efficient analysis of cylinder surfaces. It features a CMOS camera sensor with a USB interface and optional eyepiece. The system includes coaxial high-power LED lighting, manual insertion and rotation axes, and an integrated 7x zoom with click stops. It accommodates cylinder diameters ranging from 70 to 89 mm and offers a field of view from approximately 5.0 x 6.2 mm to 0.7 x 0.9 mm.
Key Features:
- Destruction-free sample analysis with high-end optics for optimal imaging.
- 360° round view capability with variable immersion depth.
- Adaptable to different cylinder diameters with optimal lighting for various surfaces.
- Available with either a camera or eyepiece, depending on the model.
Benefits:
- Automatic measurement of hollow angles and manual analysis of crystal distribution.
- Standardized inspection processes between suppliers and customers.
- Customer-specific measurement parameters and reports.
Optional Software Suite:
- Automatic honing angle measurement and manual interactive measurement.
- Protection of application-specific measurement profiles and definition of sample-dependent limit values.
- Modifiable software interface and customer-specific test reports.
- Modular expansion for pore and particle analysis, with an optional stitching module for panoramic photographs.
Figures:
- Measurement of honing structures.
- Rate of Si crystal destruction.
- Analysis of coated treads.
Catalog excerpts
J^)tO CylinderInspector QuickTestwith C-Mount Specification 2D System Fast optical inspection with camera, optional with eyepiece. Opto GmbH • Floriansbogen 2/4 • 82061 Neuried • Germany • Tel: +49 89 8980 55 0 • [email protected]
Open the catalog to page 1
Destruction-free sample analysis High-end optics for optimal image of cylinder surfaces Integrated optical zoom, to realize variable magnification levels 360° round view with variable immersion depth Adaptation to different cylinder diameters Optimum lighting for different surfaces and structures Available with camera or eyepiece depending on model Fig. measurement of honing structures Your Benefit: • • • • Automatic measurement of the hollow angle Manual analysis of crystal distribution / Destruction rate of the crystals Implementation of a standardized inspection process between the supplier...
Open the catalog to page 2All OPTO catalogs and technical brochures
IM•profile M2 Pages
Machine Vision Objectives24 Pages
Microscope Accessories28 Pages
043-112414-C022 Pages
100-CO24-TC2 Pages
CylinderInspector 2D2 Pages
Focus Drive C, Coarse2 Pages
043-6030202 Pages
043-1121082 Pages
010-3103451 Page
100-GS100-022 Pages
100-GS100-012 Pages
Opto Test & Measurement4 Pages
Opto Medical & Life Science4 Pages
043-21300X2 Pages
IP10-06q33CU5101 four pages4 Pages
Opto Software6 Pages
Imaging Modules6 Pages
Trackstand2 Pages
043-112414-C012 Pages
100-MS50-GAN2 Pages
100-MS50-AN2 Pages
100-MS25-GAN2 Pages
100-MS25-AN2 Pages
045-100130-012 Pages
MMM 4.02 Pages
IC10-05033CU3101 four pages4 Pages
IM•linea M2 Pages
IM•compact_M2 Pages
043-6100222 Pages
043-6005052 Pages
043-102302-722 Pages
Jointed Coupler1 Page
Tilting Table4 Pages
Oblique Viewing Module4 Pages
Jointed Couplers4 Pages
IM MACHINEVISIONMICROSCOPE6 Pages
- Digital imager
- Visible imager
- Industrial camera module
- OPTO positioning stage
- Full-color camera system
- Monitoring camera system
- OPTO microscope
- Calibration system
- OPTO linear positioning stage
- USB camera module
- Detection camera system
- Monochrome camera module
- Image processing camera module
- OPTO optical microscope
- GigE Vision camera
- Compact imager
- Inspection imager
- Precision positioning table