SNAP PAC R-Series Controllers Features Description The affordable and compact SNAP PAC R-series programmable automation controllers provide powerful, realtime control and communication to meet your industrial control, monitoring, and data acquisition needs. Part of the Opto 22 SNAP PAC System™, the R-series PAC is a rackmounted, industrially hardened unit that can handle multiple tasks involving digital and analog control, serial string handling, communication, and enterprise connectivity. Used with the included PAC Project Basic software suite (or PAC Project Professional, purchased separately), the Ethernetbased SNAP PAC R-series controller runs control programs written in Opto 22’s PAC Control™ software. It can monitor and control a wide range of devices and equipment wired to the I/ O on its own rack and to I/O on distributed racks equipped with SNAP PAC EB-series brains. Alternatively, the R-series controller can be used as a slave to a larger, SNAP PAC S-series standalone industrial controller or a SoftPAC™ software-based controller for PC-based control. SNAP PAC R-series controllers are well suited to original equipment manufacturers (OEMs), system integrators, and end-users in process control, discrete manufacturing, or hybrid industries and applications. SNAP-PAC-R2, SNAP-PAC-R2-FM, and SNAP-PAC-R2-W also control a mix of SNAP analog, standard and highdensity digital, and serial modules. High-speed digital functions are not included. The -FM model is Factory Mutual approved.The -W model adds wireless LAN capability (see page 2 for more information). Built-in functions and comparisons of the SNAP-PAC-R1 and SNAP-PAC-R2 are shown in the table on page 10. Part Numbers Part Analog/digital/serial rack-mounted controller with two Ethernet ports and highspeed digital functions Analog/simple digital/serial rack-mounted controller with two Ethernet ports Analog/digital/serial rack-mounted controller with two Ethernet ports and highspeed digital functions, Factory Mutual approved Analog/simple digital/serial rack-mounted SNAP-PAC-R2-FM controller with two Ethernet ports, Factory Mutual approved Wired+Wireless analog/digital/serial rackmounted controller with two wired Ethernet ports, one wireless Ethernet interface, and high-speed digital functions Wired+Wireless analog/simple digital/ serial rack-mounted controller with two wired Ethernet ports and one wireless Ethernet interface Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected] • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected] © 2007–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Six models of the SNAP PAC R-series controller are available: • SNAP-PAC-R1, SNAP-PAC-R1-FM, and SNAP-PAC-R1-W each control a mix of SNAP analog, digital (both standard and high-density), and serial modules. Full digital functions include high-speed counting, quadrature counting, pulse measurement, and period and frequency measurement. The -FM model is Factory Mutual approved. The -W model adds wireless LAN capability (see “Wired+Wireless Communication” on page 2 for more information). SNAP PAC R-Series Controllers Rack-mounted industrial controller with I/O processor included. Two independent 10/100 Mbps Ethernet network interfaces Wired+Wireless models add wireless LAN network interface as well One RS-232 port with handshaking, suitable for modem communication using PPP MicroSD card slot for removable data storage Full-featured control and HMI software included with purchase

SNAP PAC R-Series Controllers Ethernet Communication SNAP PAC R-Series Controllers All SNAP PAC R-series controllers communicate over standard 10/100 Mbps Ethernet networks and can be attached to an existing network. The controllers can also be used in an independent control network built with standard, off-theshelf Ethernet hardware. SNAP PAC R-series controllers include two 10/100 Mbps Ethernet interfaces for networking to Ethernet hosts and to other I/O units. These independent Ethernet ports have separate IP addresses that can be used with PAC Project™ Professional software to set up redundant...

SNAP PAC R-Series Controllers Software ® SNAP PAC controllers use Opto 22’s PAC Project Microsoft Windows®-compatible automation software for programming, human-machine-interface (HMI) development, and OPC connectivity. PAC Control Basic is a graphical, flowchart-based programming tool for machine control and process applications. Using PAC Control, you create, download, and run strategies on a SNAP PAC controller. In addition to flowchart programming with subroutine capability, PAC Control includes a powerful, built-in scripting language based on C and other procedural languages. PAC Control...

SNAP PAC R-Series Controllers PAC Manager is a utility application for assigning IP addresses to SNAP PAC controllers and brains, reading or changing basic controller configuration, and configuring and testing I/O. Software Availability SNAP PAC R-Series Controllers PAC Project Basic is included with SNAP PAC controllers and is a free download from the Opto 22 website. PAC Project Professional is available for purchase on our website. To get it immediately, you can buy and download the software from the Opto 22 website at www.opto22.com; the CD and printed documentation will be shipped to you....

SNAP PAC R-Series Controllers Software PAC Project Basic PAC Project Professional Number of charts that can run simultaneously Includes programming, HMI software, and configuration software; included with purchase of controller. PAC Project Basic plus OPC 2.0-compliant OPC server, database connectivity,OptoControl strategy and OptoDisplay project importing, and support for Ethernet link redundancy or network segmenting. 16 (-W models only) U.S., FCC Part 15 Subpart C; Canada, IC RSS-210 (-FM models only) Factory Mutual approved 30 months from date of manufacture • Multiple protocol support including...