SNAP PAC System Enclosures Features Description SNAP-IT enclosures make it easy to install Opto 22 I/O where you need it. With a choice of rack, panel, and wall mounting, these enclosures provide convenience and protection for your processor and I/O. Each enclosure includes an I/O mounting rack and a power supply, already wired. You add the I/O processor, either a SNAP PAC R-series controller or a SNAP PAC Ethernet brain, and the SNAP input and output (I/O) modules needed for your application. See the Products tab on the Opto 22 website (www.opto22.com) to choose your processor and I/O and to download the free PAC Project software. Enclosure Models Three SNAP-IT enclosures are available: SNAP-IT-RM16—This rack-mounted metal enclosure is a standard 3U box and can also be used as a tabletop unit. It holds one processor and up to 16 I/O modules. A typical application would be monitoring and controlling facilities and interior equipment. For the processor, if you need programming capability, choose a SNAP PAC R-series programmable automation controller. The PAC Project Basic Software Suite is a free download from our website and provides full-featured control programming plus HMI (human-machine interface) development and runtime. If you don’t need programmability, choose a SNAP PAC Ethernet brain. These brains provide local intelligence and communication and can be used with a SNAP PAC controller, with an Allen-Bradley PLC or a Modbus/TCP system, or for PCbased control. Controllers and brains communicate over a standard 10/100 Mbps wired Ethernet network. In some enclosures you can also use a Wired+Wireless™ model, which communicates over a wired Ethernet network, over an 802.11a, b, or g wireless LAN, or both ways simultaneously. Part Numbers Part SNAP PAC System 12-module enclosure, NEMA 3R, metal, panelmounted SNAP PAC System 4-module enclosure, polycarbonate, wall-mounted 120 VAC power cord (United States) for the SNAP-IT-RM16 240 VAC power cord (United Kingdom) for the SNAP-IT-RM16 240 VAC power cord (International) for the SNAP-IT-RM16 © 2012–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET SNAP PAC System 16-module enclosure, metal, rack-mounted For I/O, you can choose the mix of analog, digital, and serial modules you require. Modules range from one to 32 points per module, and a wide variety of signal types is available. All SNAP I/O modules work with any SNAP PAC brain or R-series controller and all can be mixed in the same enclosure. SNAP PAC System Enclosures Sturdy enclosures provide protection and convenience for your SNAP PAC System Just add the I/O modules and processor (brain or rackmounted controller) needed for your application Mounting rack and power supply are already wired Easy

SNAP PAC System Enclosures SNAP PAC System Enclosures SNAP-IT-PM12—This panel-mounted enclosure is a NEMA3R metal housing for mounting on interior or exterior walls or equipment. It holds one processor and up to 12 I/O modules and includes a 24 V loop power supply. example manufacturing and processing machinery, communication towers, tanks, and pipelines. SNAP-IT-WM4— The wall-mounted WM4 is a sturdy polycarbonate industrial enclosure that holds one processor and up to four I/O modules. It includes a 24 V loop power supply. SNAP-IT-PM12 units are ideal for use in industrial environments, for...

SNAP PAC System Enclosures Rack-Mounted Controller (sold separately) - NOTE: I/O modules extend beyond the back edge of the enclosure for easier wiring. Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com I rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or orga

SNAP PAC System Enclosures Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com © 2012-2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or or

SNAP PAC System Enclosures Dimensional Drawings—SNAP-IT-WM4 NOTE: If you are using the SNAP-IT-WM4 with a Wired+Wireless controller or brain, purchase a 90-degree right-angle bracket adapter for the antenna. Wired+Wireless models include the following: SNAP-PAC-EB1-W SNAP-PAC-EB2-W SNAP PAC System Enclosures Wiring the 24 VDC loop power supply AC © 2012–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET

More About Opto 22 Products Opto 22 develops and manufactures reliable, flexible, easy-to-use hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications. groov groov puts your system on your mobile device. With zero programming, you can build mobile operator interfaces to monitor and control systems from Allen-Bradley, Siemens, Schneider Electric, Modicon, and many more. Web-based groov puts mobile-ready gadgets at your fingertips. Tag them from your existing tag database, and they automatically scale for use on any device...