Catalogs >
Ophir Optronics >
Quasar Wireless Bluetooth Interface

Quasar Wireless Bluetooth Interface
1 / 7Pages

Catalog excerpts

2.2.4 Quasar Wireless Bluetooth Interface Straight from your measuring sensor to your laptop or PC with no cables Quasar wireless interface connects to any Ophir sensor and broadcasts to your PC Wireless range of 10-30 meters depending on surroundings Operates from rechargeable battery with typically >40 hours lifetime Powerful USB interface with StarLab PC application software included Converts your PC into a complete laser power/energy meter Log power and energy, average, statistics, histograms and more Monitor up to 7 Quasars simultaneously on one PC Quasar module connects to any Ophir sensor, thermal, pyroelectric or photodiode Any PC or laptop connects to Quasar module via Bluetooth adapter and operates as a power/energy meter/data logger Specification Sensor Compatibility Number of Sensors on One PC Operating Range Power All Ophir standard sensors, thermal, photodiode and pyroelectric (ª) Up to 7 Quasars can operate simultaneously and be displayed at the same time on one PC 10-30 meters depending on surroundings when used with built in laptop Bluetooth or Ophir recommended adapter Powered by rechargeable NiMH battery. Battery life typical 40 hours, 20 hours for pyro sensors. Automatically goes into sleep mode when not connected to PC. Low batt indication. Charges from 12VDC either polarity. The charger can be ordered from your local distributor. Quasar Bluetooth Wireless Sensor to PC Interface LED Indicator Bluetooth Standard LED indicator indicates whether connected, in standby or off Bluetooth class 1. Connection to PC is transparent to user. Will work with built in laptop Bluetooth and most add on USB to Bluetooth adapters. Ophir recommended USB to Bluetooth adapter Ophir P/N 7E10039 (see table below) Data Transfer Rate for Pyro Sensors 500Hz Dimensions 96mm W x 95mm D x 36mm H not including antenna Connections 15 pin D type sensor connector standard Ophir 12V charger input Notes: Ordering Information Item Quasar Bluetooth Interface USB to Bluetooth adapter Battery Pack for Quasar Description Module to operate one Ophir sensor from your PC via Bluetooth wireless interface. Comes with software. Max repetition rate for every pulse 500Hz. Powered from built in rechargeable battery. Comes with power supply. Bluetooth adapter required when not available on PC. See next line Adapter for PC or Laptop not equipped with built in Bluetooth. This adapter is tested and recommended by Ophir. Quasar is not guaranteed to work with all other adapters on the market Replacement battery pack for Quasar 121 For latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 1

2.2 PC Interfaces 2.2.1 PC Connectivity Options for Power/Energy Measurement Sample data with Ophir power meter at up to 4000 points per second Ophir power meter capable of on board storage of data of up to 250,000 points and data storage rate of up to 4000 points per second Ophir sensor to USB interfaces with up to 4 channel connectivity Ophir Pyroelectric, Thermal and Photodiode sensors measure at up to 25,000 points per second Ophir Quasar interface with wireless connectivity Transmit real time data to PC at up to 25,000 points/s per channel (sensor limited) via USB Transmit real time...

Open the catalog to page 2

2.2.5 Summary of Computer Options for Ophir Meters and Interfaces Communications With Ophir RS232, USB, Bluetooth and GPIB communication options you can transfer data from the sensor to the PC in real time or offline. You can also control your Ophir power meter from the PC. USB standard on Nova II, Vega, StarBright (optional on StarLite) power meters and Juno, Pulsar and USBI PC interfaces Bluetooth wireless on the Quasar interface RS232 standard with the Laserstar, Nova II, Vega and StarBright optional on the Nova GPIB optional with the Laserstar Ophir Power Meter and Interface...

Open the catalog to page 3

2.3 Software Solutions 2.3.1 StarLab StarLab turns your PC into a laser power/energy multi-channel station Extensive Graphic Display of Data Line Plot, Histogram, Bar chart, Simulated Analog Needle Multiple data sets on one graph or separate graphs on the same screen Advanced Measurement Processing Power/Energy Density, Scale Factor, Normalize against a reference Multi-channel comparisons User defined mathematical equations: channels A/B, (A-B)/C etc. Position & size measurement with BeamTrack sensors Can be displayed graphically or saved in text format Easily exported to an Excel...

Open the catalog to page 4

Multiple Sensors displayed together ^ Click on one of the channels ^ ^The numerical values are from the channel choser mt» «H MH tutu »M» cunt tHta Mtf MB aea Here multi line graph display has been chosen ^ Settings and functions may be opened to adjust then minimized as needed^ Additional functions are avilable from the "Functions" tab Hull, waif Trnvtm Uuiflf j Una fmnc Mtfje Spirt AestM Here multi line histogram display has been chosen For latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 5

^ Click on f(x) to open another trace Hiil iii in r: i measured values v Files are stored here. They may be viewed graphically OR numerically^ Jogging of values starts t For latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 6

BeamTrack Power/Position/Size Screens ^Open Measuring type tab and chooseTrack^ Position stability screer Displays beam center wander weighted .for dwell time at each positior 01.01.2016 —— photonics por latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 7