Catalogs >
Ophir Optronics >
ompact Juno USB Interface

ompact Juno USB Interface
1 / 7Pages

Catalog excerpts

2.2.2 Compact Juno USB Interface Convert your laptop or desktop PC into an Ophir sensor power/energy meter From sensor to interface to PC - no power source needed Plug and play with all standard Ophir smart sensors Position & size measurement with BeamTrack sensors Record every energy pulse at up to 10kHz Log power and energy, average, statistics, histograms and more with included StarLab application LabVIEW VIs and COM Object interface Very compact - is just an extension of the smart plug Smart Sensor to Juno to PC Ophir’s basic smart compact Juno module turns your PC or laptop into a full fledged Ophir laser power/energy meter. Just install the software, plug the sensor into the Juno module and connect the Juno with a standard USB cable to the PC USB port. Using the Juno, you can connect several sensors to the PC by using one Juno module for each sensor and, if necessary, a USB hub. Juno operating with StarLab software Juno with BeamTrack sensor and StarLab showing beam power, position and size Specifications Power Measurement Power log period Energy Measurement Max real time data logging to PC Trigger input and output Timing General Number of sensors supported Compatible sensors Power supply Dimensions Notes: 5s to 500hr. 10,000Hz (a) N.A. Supports time stamp for each pulse - resolution 10µs One sensor per unit. Can combine several units with software for display of up to 8 sensors on one PC Supports all standard Ophir pyroelectric, thermal, BeamTrack and photodiode sensors (b) Powered from USB 76 x 55 x 22mm (a) This is the data logging rate for every single point in turbo mode. Above that rate, the instrument will sample points but not log every single point (b) Not including RP and PD300-CIE Ordering Information Item Juno Juno USB cable Description Compact module to operate one Ophir sensor from your PC USB port. Comes with software. Max repetition rate for every pulse 10kHz. Powered from PC USB port USB-A to MINI-B Cable (1 unit supplied with Juno) 119 For latest updates please visit our website: www.ophiropt.com/photoni

Open the catalog to page 1

2.2 PC Interfaces 2.2.1 PC Connectivity Options for Power/Energy Measurement Sample data with Ophir power meter at up to 4000 points per second Ophir power meter capable of on board storage of data of up to 250,000 points and data storage rate of up to 4000 points per second Ophir sensor to USB interfaces with up to 4 channel connectivity Ophir Pyroelectric, Thermal and Photodiode sensors measure at up to 25,000 points per second Ophir Quasar interface with wireless connectivity Transmit real time data to PC at up to 25,000 points/s per channel (sensor limited) via USB Transmit real time...

Open the catalog to page 2

2.2.5 Summary of Computer Options for Ophir Meters and Interfaces Communications With Ophir RS232, USB, Bluetooth and GPIB communication options you can transfer data from the sensor to the PC in real time or offline. You can also control your Ophir power meter from the PC. USB standard on Nova II, Vega, StarBright (optional on StarLite) power meters and Juno, Pulsar and USBI PC interfaces Bluetooth wireless on the Quasar interface RS232 standard with the Laserstar, Nova II, Vega and StarBright optional on the Nova GPIB optional with the Laserstar Ophir Power Meter and Interface...

Open the catalog to page 3

2.3 Software Solutions 2.3.1 StarLab StarLab turns your PC into a laser power/energy multi-channel station Extensive Graphic Display of Data Line Plot, Histogram, Bar chart, Simulated Analog Needle Multiple data sets on one graph or separate graphs on the same screen Advanced Measurement Processing Power/Energy Density, Scale Factor, Normalize against a reference Multi-channel comparisons User defined mathematical equations: channels A/B, (A-B)/C etc. Position & size measurement with BeamTrack sensors Can be displayed graphically or saved in text format Easily exported to an Excel...

Open the catalog to page 4

Multiple Sensors displayed together ^ Click on one of the channels ^ ^The numerical values are from the channel choser mt» «H MH tutu »M» cunt tHta Mtf MB aea Here multi line graph display has been chosen ^ Settings and functions may be opened to adjust then minimized as needed^ Additional functions are avilable from the "Functions" tab Hull, waif Trnvtm Uuiflf j Una fmnc Mtfje Spirt AestM Here multi line histogram display has been chosen For latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 5

^ Click on f(x) to open another trace Hiil iii in r: i measured values v Files are stored here. They may be viewed graphically OR numerically^ Jogging of values starts t For latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 6

BeamTrack Power/Position/Size Screens ^Open Measuring type tab and chooseTrack^ Position stability screer Displays beam center wander weighted .for dwell time at each positior 01.01.2016 —— photonics por latest updates please visit our website: www.ophiropt.com/photonics

Open the catalog to page 7