1.1.2.7 High Power Thermal Sensors 1.1.2.7.2 High Power Water / Air / Conduction Cooled Thermal Sensors 1W to 2000W Features • Very large aperture • Broadband or Pulsed absorber • Up to 2000W • Ø120mm aperture Very large beams Absorber Type Spectral Range µm Aperture mm Power Mode Power Range Maximum Intermittent Power Very large beams, short pulses, high average power PF volume absorber 0.3 – 2.2 Ø120mm High peak power, high energy measurements PF volume absorber 0.15 – 20 Ø120mm Power Scales Power Noise Level Maximum Average Power Density W/cm2 Response Time with Meter (0-95%) typ. s Power Accuracy +/-% Linearity with Power +/-% Energy Mode Energy Range Energy Scales Minimum Energy Maximum Energy Density J/cm2 <100ns 1µs 0.5ms 2ms 10ms 1s Cooling Minimum and Recommended Water Flow Rate at Full Power Fiber Adapters Accessories for High Power Sensors Weight kg Compliance Version Part number Consult Ophir representative See pages 77-81 4.5 CE, China RoHS Consult Ophir representative See pages 77-81 4.5 CE, China RoHS Consult Ophir representative See pages 77-81 4.4 CE, China RoHS Water temperature range 18-30°C. Water temperature rate of change <1°C/min. Pressure drop across sensor 0.06MPa. Calibrated for 0.532μm and 1.07μm. Max additional error at other wavelengths not specified above: ±2% Water temperature range 18-30°C. Water temperature rate of change <1°C/min. Pressure drop across sensor 0.06MPa. For 10-50Hz derate as follows: 1064nm not derated 532nm not derated 355nm 70% of stated value 266nm 15% of stated value 193nm 10% of stated value Damage threshold 1.5J/cm² for wavelengths <500nm For 10-50Hz derate as follows: 1064nm not derated 532nm not derated 355nm 70% of stated value 266nm 15% of stated value 193nm 10% of stated value Damage threshold 1.5J/cm² for wavelengths <500nm (4x) M4x5 deep Mounting Threads (4x) M4x5 deep Mounting Threads (4x) M5x10 deep Mounting Threads Front Side (2x) Quick Connect Fitting for 3/8 Plastic Hose Back Side Front Side Back Side