1.1.2.4 Low - Medium Power Thermal Sensors - Apertures to 17.5mm 100mW to 200W Features F80(120)A-CM-17 / F150(200)A-CM-16 High repetition rate pulsed lasers for material processing High repetition rate pulsed lasers for material processing High repetition rate pulsed lasers for material processing Absorber Type Spectral Range µm Aperture mm Power Mode Power Range Maximum Intermittent Power W Power Scales Power Noise Level CW Maximum Power Density kW/cm2 Pulsed Maximum Average Power Density kW/cm2 (d) Response Time with Meter (0-95%) typ. s Calibration Uncertainty ±% Power Accuracy ±% Linearity with Power ±% Energy Mode Energy Range Energy Scales Minimum Energy mJ Maximum Energy Density J/cm2 0.54 CE, UKCA, China RoHS 0.3 CE, UKCA, China RoHS 0.54 CE, UKCA, China RoHS 7Z07107 (a) At 1064nm. For shorter wavelengths derate maximum energy density to: 355nm 50% of above values 266nm 50% of above values (for CM type 30% of above values) 193nm 10% of above values (b) The sensor is only calibrated in the spectral range 0.25-2.2µm (c) At 1064nm (d) For repetition rates ≥100kHz (e) at 200W add additional linearity error of ±0.5% ABSORBER SURFACE FAN POWER SUPPLY SOCKET FAN POWER SUPPLY SOCKET ABSORBER SURFACE Cooling Fiber Adapters Available (see page 93) Weight kg Compliance Version Part number • High repetition rate pulsed lasers for material processing • Air and fan cooled • CW to 80W, intermittent to 200W JANUARY 26, 2022 FOR LATEST UPDATES, PLEASE VISIT WWW.OPHIR