Catalogs >
Ophir Optronics >
Calorimetric Power Meter

Calorimetric Power Meter
1 / 1Pages

Catalog excerpts

1.1.2.7 High Power Thermal Sensors 1.1.2.7.3 Calorimetric Power Meter 200W to 6000W Features ֺ ֺ Very large aperture 200mm x 200mm ֺ ֺ Water cooled ֺ ֺ Up to 6000W ֺ ֺ Smart sensor or RS232 interface Largest size beams to 6kW Measurement Method Absorber Type Spectral Range µm (a) Aperture mm Power Mode Power Range Power Scales Power Noise Level Maximum Average Power Density kW/cm2 Response Time with Meter (0-95%) typ. s Power Accuracy +/-% Linearity with Power +/-% Maximum Energy Density J/cm2 <100ns 1µs 0.5ms 2ms 10ms 1s Cooling Recommended Flow Rates Outputs Calorimetric, measure water temperature rise and flow rate Broadband 0.19 - 20 198 x198mm Fiber Adapters Dimensions Weight kg Version Part number 200W – 6000W 6kW / 1kW 5W 1.5 at 1000W 0.4 at 6000W 50 4 (a) (b) 2 (b) 0.3 0.4 5 10 30 4000 water 6 liter/min (b) 1. 5 meter cable terminated in DB15 Smart Connector measuring power only. 2. RS232 with supplied PC program measuring power, water temp. and water flow rate. In RS232 mode, the sensor is powered by the supplied 12V wall cube. N.A. See drawing 3.6 7Z02764 Calibrated for ~0.8μm and 1.08μm at flow rate of 6 liters/min. Calibration for 10.6μm available Min flow rate at maximum power 6 liter/min. Flow rate may be proportionately less at lower power. Flow rate dependence of reading is ±2% for flow rates between 5 and 9 liters/min. Water temperature range 15-25°C. Water temperature rate of change <1°C/min, at max power, proportionately less at lower power Absorbing Surface Fitting for 1/2" tubing Water In 12VDC Power Supply Socket Fitting for 1/2" tubing Water Out For latest updates please visit our website: www.ophiropt.com/photonics REV. 1

Open the catalog to page 1