May 2010 © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver FMS6363A Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Features .. Three 7th-Order 32MHz (HD) Filters .. Drives Single AC-or DC-Coupled Video Loads (150Ù) .. Drives Dual AC-or DC-Coupled Video Loads (75Ù) .. Transparent Input Clamping .. Single Supply: 3.3V – 5V .. AC-or DC-Coupled Inputs and Outputs .. DC-Coupled Output Eliminates AC-Coupling Capacitor .. Robust 9kV ESD Protection .. Lead-Free SOIC-8 Package Applications .. Cable Set-Top Boxes .. Satellite Set-Top Boxes .. DVD Players .. HDTV .. Personal Video Recorders (PVR) .. Video On Demand (VOD) Description The FMS6363A Low-Cost Video Filter (LCVF) is intended to replace passive LC filters and drivers with a low-cost integrated device. The three 7th-order filters provide improved frequency response performance over the FMS6363 and other 3-channel HD VFD devices. The FMS6363A may be directly driven by a DC-coupled DAC output or an AC-coupled signal. Internal diode clamps and bias circuitry may be used if AC coupled inputs are required (see Applications section for details). The outputs can drive AC-or DC-coupled single (150Ù) or dual (75Ù) video loads. DC coupling the outputs removes the need for large output coupling capacitors. The input DC levels are offset approximately +280mV at the output (see Applications section for details). Related Resources AN-8002 – FMS6418B 4:2:2 Application Note AN-6024 – FMS6xxx Product Series Understanding Analog Video Signal Clamps, Bias, DC Restore, and AC or DC coupling Methods AN-6041 – PCB Layout Considerations for Video Filter/Drivers Ordering Information Part Number Operating Temperature Range Package Packing Method Quantity FMS6363ACSX -40°C to +85°C 8-Lead SOIC Reel 2500

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 2 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Block Diagram IN1 IN2 IN3 OUT1 OUT2 OUT3 Clamp 6dB Bias 6dB Bias 6dB Figure 1. 7th-Order 30MHz Filter Pin Configuration IN1 OUT1 IN2 IN3 OUT3 VCC OUT2 GND 1 2 3 4 8 7 6 5 Figure 2. Pin Configuration Pin Definitions Pin# Name Type Description 1 IN1 Input Video Input Channel 1 2 IN2 Input Video Input Channel 2 3 IN3 Input Video Input Channel 2 4 VCC Input Positive Power Supply 5 GND Input Device Ground Connection 6 OUT3 Output Filtered...

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 3 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min....

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 4 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver DC Electrical Characteristics Unless otherwise noted TA=25°C, VCC=3.3V, RS=37.5Ù; all inputs are AC-coupled with 0.1ìF; all output AC-coupled with 220ìF into 150Ù load. Symbol Parameter Conditions Min. Typ. Max. Units Supply VS Supply Voltage Range VS Range 3.14 3.30 5.25 V ICC Quiescent Supply Current(1) VS=+3.3V, No Load 22 35 mA VS=+5V, No Load 34 40 mA VIN Video Input Voltage Range Referenced to GND if DC Coupled 1.4 VPP PSRR...

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 5 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Typical Application Figure 3. Typical Application

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 6 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Application Information Application Circuits The FMS6363A low-cost video filter (LCVF) provides 6dB gain from input to output. In addition, the input is slightly offset to optimize the output driver performance. The offset is held to the minimum required value to decrease the standing DC current into the load. Typical voltage levels are shown in Figure 4: There is a 280mV offset from the DC input level to the DC output level. V...

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 7 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver The same method can be used for biased signals. The Pb and Pr channels are baised to set the DC level to 500mV. Figure 9. Biased SCART with DC-Coupled Outputs The same circuits can be used with AC-coupled outputs if desired. DVD or STB SoC DAC Output LCVF 75Ù Clamp Active 0.1ì 0V - 1.4V 220ì Figure 10. DC-Coupled Inputs, AC-Coupled Outputs DVD or STB SoC DAC Output LCVF Clamp Active 0.1ì 0V - 1.4V 75Ù 220ì Figure 11. AC-Coupled...

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 8 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Layout Considerations General layout and supply bypassing play a major role in high-frequency performance and thermal characteristics. Fairchild offers a evaluation board to guide layout and aid device evaluation. The evaluation board is a four-layer board with full power and ground planes. Following this layout configuration provides optimum performance and thermal characteristics for the device. For the best results, follow the...

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6363A Rev. 2.0.1 9 FMS6363A — Low-Cost, Three-Channel 7th-Order High-Definition Video Filter Driver Physical Dimensions 8° 0° SEE DETAIL A NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AA, ISSUE C, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS. D) LANDPATTERN STANDARD: SOIC127P600X175-8M. E) DRAWING FILENAME: M08AREV13 LAND PATTERN RECOMMENDATION SEATING PLANE C GAGE PLANE x 45° DETAIL A SCALE: 2:1 PIN ONE INDICATOR 4 8 1 B 5 A 5.60 0.65 1.75 1.27...