Pinout Specifications for UMLP-10 Connectors

Overview

The document provides the pin assignments for two variants of UMLP-10 connectors, specifically the FSUSB40 and FSUSB42 models, shown in a top-through view format.

FSUSB40 Pin Assignment

• D+: Data positive line
• GND: Ground
• D–: Data negative line
• HSD2+: High-Speed Data lane 2 positive
• HSD1+: High-Speed Data lane 1 positive
• HSD1–: High-Speed Data lane 1 negative
• HSD2–: High-Speed Data lane 2 negative
• Sel: Selection pin
• /OE: Output Enable (active low)
• VCC: Power supply voltage

FSUSB42 Pin Assignment

• The FSUSB42 pinout is identical to FSUSB40, with the same pin names and functions in the same order.

Critical Information

• Both connectors share the same pin configuration, facilitating interchangeability or compatibility in design.
• Pin functions include data transmission lines, power, ground, control signals (Selection and Output Enable), and high-speed differential pairs.
• The top-through view indicates the orientation for correct connector placement.

Summary

This technical excerpt defines the pin assignments for two UMLP-10 connectors, FSUSB40 and FSUSB42, emphasizing their identical pin configurations and functions. This information is essential for hardware engineers designing or troubleshooting circuits involving these connectors.