Catalogs >
Onosokki >
SE 1520

SE 1520
2Pages

Catalog excerpts

For Vehicle and Bench Installations GASOLINE ENGINE TACHOMETER Simply clamp the detector(IP-292/3000) around the primary cable of the ignition coil. Provide anti-noise and stable analog/pulse output by means of input, output and power supply isolation. IP-292 Maximum diameter of cord 10mm(MAX Operating temperature 40 120 Engine rotation detector (optional) Detect the number of ignition pulses produced in the gasoline engines by clamping the primary cord of the ignition coil. IP-3000 Maximum diameter of cord 5mm(MAX Operating temperature 40 120 Engine rotation detector (optional) Detect the number of ignition pulses produced in the gasoline engines by clamping the primary cord of the ignition coil or the current cable of the electronic distributor.

Open the catalog to page 1

SE-1520 GASOLINE ENGINE TACHOMETER SE-1520 Dimensions Unit : mm 176.50 144 181 116 5 11 IP-3000 type detector dimensions IP-292 type detector dimensions 20 30 8 5 Heat-resistant signal cable 4.9m 30 Signal cable (approx. 4.9m) 33.2 48 40 14.3 9.5 CO2 (BNC) plug 102 CO2 (BNC) plug Specifications INPUT SECTION Detector (optional) Applicable engine Measuring range OUTPUT SECTION IP-292, IP-3000 2-cycle engines (1,2 or 3 cylinders) 4-cycle engines (2,3,4,5,6 or 8 cylinders) 2-cycle engines 1 or 2 cylinders 500 to 10,000 r/min 3 cylinders 500 to 8,000 r/min 4-cycle engines 2,3,4 or 5 cylinders...

Open the catalog to page 2