Catalog excerpts
Model code The model code of the RP series rotary encoder consists of abbreviations of functions and structures. However, there are exceptions, such as simplifying abbreviations for some models. [RP-1700 series] Installation method and shaft shape [SP-405ZA series] S P-405ZA - | Output pulse number | P/R *Note: Collector output : standard Open collector output : option (Please specify when ordering.) The RP series conforms to JIS C 0920 (compliant with IEC 529), protection class for electro-mechanical equipment waterproofing and dustproofing. Grade is classified as follows, and the test...
Open the catalog to page 2Low torque miniature type General-purpose industrial type General-purpose miniature type Model name The number of output pulses allowable shaft load Thrust Starting torque Moment of inertia s - Weight Operation temperature range Humidity o - o Shock resistance Output waveform Output voltage Duty Phase difference o Response frequency V) _ Signal accuracy (adjacent error) Output type iu - Connection method Power requirement Applicable model *12 Totem pole output : standard (470 Q or more of load resistance) Open collector output : option (DC40 V, 50 mA or less) *13 Crimped terminal: RBC...
Open the catalog to page 3Bottom-mount type/ flange-mount type RP-1710/20 series RP-1730/40 series [Features] • Excellent resistance to shock and shaft loading • High resolution, wide range of output pulse types (Selectable from 61 types, max. 120000 P/R) • Line driver output can be selected to enable long distance transmission • Compatible to worldwide AC and DC power supply • Selectable connection from either terminal strip or connector • Complied with IP65 by affixing an oil seal to the rotating shaft and selecting terminal strip as an option Adjacent error * When measuring the rotation fluctuation from the pulse...
Open the catalog to page 4* In the table, green/gray indicates that the circumference of the green PVC is marked with gray. ■ RP-1730 series (terminal strip type/ D cut shaft) [Outer dimensions] (unit: mm) ■ RP-1710 series (terminal strip type/ D cut shaft)
Open the catalog to page 5Ultra-compact type Standard output pulses (P/R) Optional output pulses (P/R) Ultra-compact shaft type appropriate to the built-in assembly [Outer dimensions] (unit: mm) [Features] ● Economical type to meet the needs of OEM ● Outer diameter φ38, the mass approx. 100 g ultra-compact and lightweight ● 2-phase square wave + zero-mark signal output ● Selectable the number of pulses from 13 kinds [Electrical specification] (*: an optional specification) Output Waveform : 2-phase square wave + zero-mark (timing optional) Output Voltage : Hi: supply voltage - 20 % or more, Lo: 0.5 V or less Output...
Open the catalog to page 6Roller encoder Standard output pulses (P/R) Easy measurement of line speed and length of traveling body [Outer dimensions](unit: mm) 103 10 47 HIROSE ELECTRIC CO., LTD Model name: RM12BRB-5PH 35.5 ● The number of pulses selectable from 120, 200, 1200 P/R. [Electrical specification] : For speed: 120, 1200 For length: 200 Output waveform : 2-phase square wave Duty ratio : 50 ± 25 % Phase difference : 90 ± 45 ℃ Output voltage (at DC12 V supply) Hi: 10 V or more Lo: 0.5 V or less Output method : totem pole output (load resistance 470 Ω or more) * option RP-0701 : emitter output RP-0702 :...
Open the catalog to page 7• Wide measurement range from low to high speed (0.2 Hz to 320 kHz) • High-speed conversion per signal period • Rapid deceleration follow-up function • Automatic center frequency follow-up function (option) can close up transient fluctuation component. Input terminal Input format Filter Analog output connector signal [Electrical specification] Response : within one cycle time of input frequency + 3.5 ^s Input voltage : AC input signal voltage range: 0.3 to 30 V p-p DC input signal voltage range Hi: 4 to 30 V, Lo: 1 V or less Input frequency range : 0.2 Hz to 320 kHz In full scale mode...
Open the catalog to page 8Multi-functional tachometer ● Rotation measurement over a wide range from low to high speed (input frequency: 0.6 mHz to 100 kHz) is available. ● Computing and displaying signals from two rotating bodies ● Independent coefficient correction function of each channel can convert it to an arbitrary physical quantity proportional to rotation speed. ● 2ch calculation function can display rotation speed difference/ rotation speed ratio / rolling reduction/draw/ rotation change rate/direction of rotation. [Electrical specification] Applicable detector : MP series electromagnetic type /...
Open the catalog to page 9Reversible counter RV-3150 ● Reversible counter that measures linear position, displacement, dimension, etc. ● Adopted large-sized LED (14 mm) for easy viewing. ● Extensive external output function (comparator, analog, BCD, RS-232C communication) ● 4 types of comparator setting values are available, can be saved as a condition. Supply power for sensor External control signal Comparator function Analog output RS-232 communication Power supply Power consumption 【Example of System Configuration】 RP-1700 series rotary encoder RP-7400 series roller encoder [Outer dimensions] (unit: mm) GOOD LOWER...
Open the catalog to page 10Isolation pulse transmitter • Receives square wave output from rotary • Supplies 12 DCV to RP series of DC power type. • Case is an airtight structure that can be installed at the site near the detector. • Due to isolation of input/output circuit, it is resistant to noise. [General specifications] Output voltage Output resistance Delay time Power requirement Power supply : Hi: 10 V ± 2 V (5 kQ load) Lo: 0.5 V or less (5 kQ load) : collector resistance 330 Q : approx. 2 ^s between input and output : AC 100 V, approx. 12 VA : DC12 V, 0.15 A -5 to 40 0C -10 to 70 C approx. 4 kg JIS C 2805,...
Open the catalog to page 11[Cable List for RP-1700 Series ] Application * Option cables above are for domestic use. Please contact your nearest distributor or Ono Sokki sales office nearby when export. •For China : not provided [Cable List for RP Series (Except RP-1700 Series)] Application ◎ mark: The standard item that is always stocked. O mark: The standard item that may be out of stock. If it is out of stock, the delivery time is 1 to 2 months. △ mark: Made-to-order product. The delivery time is about 1 to 4 months. t mark: The shipping fee will be charged separately. Note: Refer to page 5 for details on cable R6...
Open the catalog to page 12All Onosokki catalogs and technical brochures
-
SE-1200
2 Pages
-
HR-6800
3 Pages
-
GE-1400
2 Pages
-
Stand Specs
1 Pages
-
Dimensional Drawing
1 Pages
-
MP Series drawings
1 Pages
-
Digital Tachometer Brochure
19 Pages
-
Measurement microphone
2 Pages
-
sr-2200
8 Pages
-
MI Series
6 Pages
-
VT-5200/5700 Series
12 Pages
-
GS-7710
2 Pages
-
GS-5050
2 Pages
-
GS-1713/1730
3 Pages
-
GS-3800 series
2 Pages
-
GS-1713/1730
4 Pages
-
BS Series
2 Pages
-
DG-4000
4 Pages
-
gageway wireless system
1 Pages
-
EG-225
2 Pages
-
RP-7400
2 Pages
-
Ono Sokki product
8 Pages
-
LG-9200
2 Pages
-
LG-9200
2 Pages
-
LG-9200
2 Pages
-
SE-1100
4 Pages
-
HT-6200
4 Pages
-
HT-5500
3 Pages
-
HT series
3 Pages
-
Digital hand tachometers
4 Pages
-
GE-1400, HT-6100
4 Pages
-
DG-525H
6 Pages
-
DG-3610
2 Pages
-
FT-7200
8 Pages
-
CT-6520B
4 Pages
-
TM-3100 Series
12 Pages
-
HT-5100
4 Pages
-
HT-3100
4 Pages
-
FV-1300
4 Pages
-
DS-3000
2 Pages
-
Portable FFT Analyzer
8 Pages
-
Digital Torque Meter
16 Pages
-
SE 2500
4 Pages
-
SE 1620
2 Pages
-
SE 1520
2 Pages
-
SE 1100
4 Pages
-
CT - 6520
4 Pages
-
FT-2500
8 Pages
-
SE-1620
2 Pages
-
GE-1200
2 Pages
-
Non-Contact Thickness Meter
10 Pages
-
Digital Linear Gauges
6 Pages
-
Torque Detectors
1 Pages
-
Digital Torque Meter
1 Pages
-
Vibration Comparator
8 Pages
-
Personal FFT Analyzers
6 Pages
-
LA-1220 - Sound Level Meter
5 Pages
-
Ds 2000 series
4 Pages
-
FP/FX/FZ Series Detectors
16 Pages
Archived catalogs
-
HT-6100
4 Pages
-
SE-2500
4 Pages
-
HT-6100
4 Pages
-
Digital Linear Gauge Sensor
2 Pages
-
DG-4000 series
4 Pages