Diesel Engine Tachometer For diesel engine measurement applications Measurement is made with an exclusive detector (sold separately) Only by clamping the CP-044 detector to a fuel injection pipe. Three outputs—analog, monitor and pulse—provided as standard Use the analog output function to record the number of rotations, the monitor output function to check the sensor’s detection waveform, and the pulse output function to output rotation synchronization signals. Large LCD with backlight Built-in memory function Trigger adjustment function provided 20 data (MAX.) can be saved to memory. The tachometer can be fixed to a tripod for continuous measurement. Measurement method Diesel engine fuel injection pipe An example of engine rotation measurement by vibrations (SE-2500) Input connector SE-2500 * Measurement of diesel engines can be performed with the combination of these two devices.

Specifications Applicable engines Four-cycle diesel engines Detection method Detection of the pulsation generated by the injection pipe at the time of fuel injection Compatible detector Calculation method Periodic operation method Measurement time 1s + the time required for 1 period or less 5-digit LCD, with backlight (character height: 10.2 mm) Display update time Measurement units Load resistance High level : At least +4.5 V Low level : Up to +0.5 V Positive logic At least 100 kΩ Power source 400 to 8000 r/min (When r/s is used as a unit, the measurement range will be obtained by dividing the...