Catalogs >
Onosokki >
LG-9200

LG-9200
2Pages

Catalog excerpts

Optical Detector LG-9200 Overview The LG-9200 is a non-contact type optical detector which emits red visible light and detects the reflected light on a rotating shaft. The LG-9200 has a built-in compact amplifier and outputs the square wave (voltage) after waveform shaping. Feature ● Upgraded performances (compared to the previous model LG-916) Detection distance: up to 40 mm / Response speed: up to 40 m/s ● Easy to adjust a position by red visible light ● Possible to detect from lower speed almost 0 r/min Red visible light from the LG-9200 ● A unified structure of light source, receiver and amplifier (weight: 150 g) ● Provided a drop-proof connector as standard Specification Detection method : Light reflection using an optical fiber sensor Light source : Light emitting diode (red visible light) Detection distance : 20 to 40 mm (recommended distance) *when using 12-mm square reflective mark Max. response speed : 40 m/s (converted by the circumferential speed of a rotating shaft) Measurement range: Refer to the following graph Output : Rectangular wave (Hi:+5 ±0.5 V, Lo:+0.5 V or less) Output impedance : approx. 1 kΩ Response delay time : 1 ms or less Vibration resistance Shock resistance (1 hour per each). (JISC0911-1960) three times for each of X,Y and Z directions. (JISC0912-1960): Operating temperature range: -10 to60 ℃ Storage temperature range: -20 to 80 ℃ Weight : approx. 150 g Power supply : DC12 V±2 V Power consumption : 60 mA or less (at 12 V) Applicable display : TM series, RV-3150, FV-5300 Measurement range may change depending on the quality of the surface materials or color of the object. Compliant to CE marking when the LG-9200 is used with the following products by Ono Sokki. Tachometer : TM-3100 series, FT-2500, CT-6520B F/V convertor : FV-1400 Connecting cable: MX-7100, 8100 series Applicable FV convertor : FV-1400 Applicable standard: CE marking Accessories : reflective mark x 1, lock nut x 2 instruction manual x 1

Open the catalog to page 1

Dgrtal tachometer Reflective mark Accelerometer with built-in amplifier Acceleration signal Headphone output A reflective seal is stuck on feather and Light from LG-9200 is applied to feather. LG-9200 is connected with Digital Tachometer Rotation display, Analog output are possible for Diagnosis of bearing requires oscillating measurement and rotation measurement. LG-9200 is possible direct connection to FFT Exclusive amplifier for LG-9200 is unnecessary. A Outer appearance and specifications are subject to change without prior notice. 2171 Executive Drive, Suite 400 E-mail :...

Open the catalog to page 2