Diesel Engine Tachometer For diesel engine measurement applications Measurement is made with an exclusive detector (sold separately) Only by clamping the CP-044 detector to a fuel injection pipe. Three outputs—analog, monitor and pulse—provided as standard Use the analog output function to record the number of rotations, the monitor output function to check the sensor’s detection waveform, and the pulse output function to output rotation synchronization signals. Large LCD with backlight Built-in memory function Trigger adjustment function provided 20 data (MAX.) can be saved to memory. The tachometer can be fixed to a tripod for continuous measurement. Measurement method Diesel engine fuel injection pipe An example of engine rotation measurement by vibrations (SE-2500) Input connector SE-2500 * Measurement of diesel engines can be performed with the combination of these two devic

Applicable engines Options (sold separately) Diesel engine rotation detector Signal cable (For both analog and pulse output signals) AX-501 Magnetic stand/Stand jig HT-0522/0521A (Shown with tachometer mounted) Outer dimensions (Unit: mm) 180.5 186.5l11 Input connector Battery compartment (four type AAA batteries) Connector for pulse output Connector for analog/monitor output Connector for the AC adapter WORLDWIDE ONO SOKKI CO., LTD. 1-16-1 Hakusan, Midori-ku, Yokohama, 226-8507, Japan Phone : +81-45-935-3918 Fax : +81-45-930-1808 E-mail : [email protected] *Outer appearance and specifications...