*mydirectindustry

CT-6520B

Product catalog summary

Overview: The CT-6520 Universal Engine Tachometer is designed for accurate digital RPM measurements across various engine types. It is compatible with Ono Sokki detectors and can be used for both engine and other rotating body measurements.

Major Features:

Selector switch for engine type optimization.
Compatible with 2/4-cycle engines, 1-8 cylinders.
Input pulses per revolution adjustable from 0.5 to 199.5 P/R.
Standard digital, analog, and pulse outputs.
CE marking compliant, supports AC and DC power.
Two preset speed levels for comparison.

Applicable Detectors:

IP-292/296: Detects spark signals from ignition systems.
IP-3000: Applicable for both low and high voltage detection.
OM-200: Electromagnetic detector for magneto-type ignition systems.
VP-202/201: Vibration detector for piston movement.
MP-910/981: Magnetic detector for gear-mounted rotating shafts.
LG-916: Opto-electric detector using LED light source.

Specifications:

Measurement range: 400 to 20,000 r/min.
Input pulse switching: 0.5 to 199.5 P/R.
Display: 5-digit green LED, updated every second.
Voltage output: 0 to 10 V, current output: 0 to 20 mA.
Power: 100 to 240 VAC or 11 to 15 VDC.
Operating temperature: 0 to 40°C.

Output and Alarm Functions:

Overrun and engine running detection with contact signal output.
Analog and digital outputs with BCD and TTL levels.

Accessories:

AC and DC power cables, midget fuses, instruction manual.

Contact Information: Ono Sokki Co., Ltd. provides global support with offices in the USA, Europe, and China.

Catalog excerpts

UNIVERSAL ENGINE TACHOMETER CT-6520 Provides error-free digital rpm measurements and, when used in combination with Ono Sokki detectors, can be used to make rpm measurements on virtually any engine type.

Open the catalog to page 1

Sensor selection enables rpm me The CT-6520 Universal Engine Tachometer uses a multiplier circuit to both reduce measurements time and improve measurement accuracy. An input pulse selection switch is used to set the number of pulses produced by the detector for each revolution, enabling measurement on virtually any engine type. In addition, the CT-6520 can be used for rpm measurements on other rotating bodies as well. Major Features A selector switch can be used to specify the type of engine to be measured, optimizing measurement conditions for the Ono Sokki detector to be used. Used in combination...

Open the catalog to page 2

asurements on all engine types. Specifications Input Section Analog Output Applicable detectors : (sold separately) Measurement range : Input pulse switching : IP-292, IP-296, IP-3000, VP-202(201), OM-200, MP-910, MP-981, LG-916. 400 to 20,000 r/min 0.5 to 199.5 P/R (in 0.5 P/R steps) (depending upon detector) Trigger level : IP-292/296/3000/OM-200/VP-202/201: Set using a dial-type potentionmeter Other detectors : Internally adjusted and fixed * The measurement range (i.e., upper rpm limit) will depend upon the detector used and the setting of the input pulse switch. Digital Display Type : Measurement...

Open the catalog to page 3

Outer Dimensions, Panel Cutout Dimensions and Panel Description Panle mounting fixtures SENSOR SELECT DIGITAL ENGINE TACHOMETER Panle cutout dimensions IP-292/296/3000 Panel Side Cable Side Panel mounting fixtures are optional. Signal Cable Guide Detector type IP–292/296 IP–3000 VP–202 MP–930 Detector output cable Detector output connector Approx. 4.9m, direct output CO2 plug (3C-2V) Approx. 4.9m, direct output CO2 plug (FEP-fluorocarbon resin) Approx. 2.9m, direct output CO2 plug (Chloroprene) Approx. 0.5m, direct output CO2 plug (3C-2V) Connecting cable CO2 adaptor R04-R6M Approx. 2.9m, direct...

Open the catalog to page 4

CT-6520B

CT-6520B

Catalog excerpts

All Onosokki catalogs and technical brochures

Archived catalogs