Spray Dry Products on Pilot Scale SD310 Spray Dryer Traceability, complete control & predicted humidity % OMVE’s SD310 Spray Dryer provides a high quality of spray dried products by controlling and monitoring the temperature and moisture content. This minimizes product loss and makes product development easier and faster. This ergonomically designed system is meticulously crafted to provide you with the best configuration, safety during operation, process control, ease of cleaning, sanitary design, and scalability. Operators can rely on the high level of automation to reduce the development time of food applications. The SD310 comes standard with several control points and monitors, as well as 15 process parameters. The spray is adjustable, easy to inspect and clean, and can be customized for various spraying profiles. The SD310 Spray Drying pilot plant is the next level for drying products in small scale production plants, R&D labs and universities worldwide. Features & Benefits • Two-fluid nozzle is adjustable and has a replaceable insert for a high range in viscosities • Effective control of the air and humidity to gain the desired powder consistency • Prediction of the residual moisture level for increased yield • Up to 15 process parameters are monitored and logged for traceability • Meets ATEX, secure operation for personnel & facilities Working Principle • Milk powders • Medical foods • Sports/ fruit nutrition powders • Protein powders • Infant foods • Functional ingredients • Plant-based protein powders • Supplementary foods The liquid feed is injected into the drying chamber through a two-fluid nozzle. The two-fluid nozzle atomizes the fluid into small homogeneous droplets. Hot air is simultaneously injected into the drying chamber. The standard drying configuration is co-current downflow. This configuration ensures that the temperature of the powder is kept below the desired setpoint. As the droplets fall through the chamber, the water adhered to the solids evaporates, resulting in a powder. The powder is transported out of the drying chamber by the outgoing hot air and is separated by a cyclone downstream. Powder is collected from the cannister at the bottom of the cyclone during operation. Spray Dryer

Optional Accessories Control unit blower & HMI control Spray Dryer Product Code Product Code SD OMVE Americas Inc. Milton, Canada Tel +1 416 986 8442 De Meern, The Netherlands Tel +31 30 241 00 70 [email protected] Disclaimer: no rights can be derived from the content in this brochure. Version 1/2025