OMVE CIP250 Fully Automated Cleaning in Place Unit

Product catalog summary

Features & Benefits
The CIP250 is equipped with an electric heated element and offers automated cleaning for a 50L vessel with a high-speed flow rate of up to 2.4m³/hr. It is designed to ensure operator safety and environmental protection against splashes, providing a safe, effective, and time-saving cleaning solution.

Working Principle
The cleaning cycle involves several steps: starting the CIP unit, washing with cold/hot water, alkaline cleaning at approximately 70°C, rinsing with water, acid cleaning at approximately 70°C, and a final rinse. The process concludes with emptying the tank and pipes.

Applications
The CIP250 is suitable for cleaning various OMVE units such as carbonators, fermenters, buffer tanks, blending vessels, and UHTs, as well as other lab and pilot equipment. Operators manually fill the 50L CIP tank with detergent and set processing conditions for the required cleaning cycle.

Specifications
The CIP250 features a 50L vessel, maximum pressure of 4bar, and a flow rate of up to 3000L/hr. The optimal cleaning temperature is between 55-65°C, with a maximum of 80°C. The unit weighs 250kg and measures 980 x 880 x 1120mm. It requires specific electrical and water utilities for operation.

Contact Information
OMVE Netherlands B.V., De Meern, The Netherlands, Tel: +31 30 241 00 70, Email: [email protected]
OMVE Americas Inc., Milton, Canada, Tel: +1 416 986 8442, Website: omve.com

Disclaimer: No rights can be derived from the content in this brochure. Version 1/2025.

Catalog excerpts

OMVE CIP250 Fully Automated Cleaning in Place Unit-1

Manual Cleaning-in-Place Unit CIP250 Cleaning-in-Place Unit Safe, effective & time-saving R&D labs require efficient and accurate CIP methods to remove product residue from processing plants and to prevent contamination of your test results. The OMVE CIP250 is a compact unit that ensures thorough cleaning of small pilot plants without wasting valuable time dismantling the parts. For efficient cleaning, operators first manually fill the 50L CIP tank with the required detergent mix and set the processing conditions. The CIP250 will circulate the solution/mixture for the required time, depending on the application and the kind of cycle required (alkaline/caustic mix or acid mix circulation). This efficient CIP unit is available with electric heating capabilities. Depending on the size of the equipment volume to be cleaned, OMVE can supply the CIP250 with a 50L vessel to ensure correct minimum flow velocities to properly clean all vessels & pipework. Our CIP unit is suitable to clean OMVE units such as carbonators, fermenters, buffer tanks, blending vessels, UHTs as well as other lab and pilot equipment. Features & Benefits Equipped with electric heated element Safe & secure design to protect the operator's health & safety and the environment (facilities) against splashes Working Principle Cleaning Cycle - Step-by-Step automatically clean OMVE units Step 1. Start of the CIP unit including carbonators, fermenters, Step 2. +/- 10 Min. cold/hot water washing of product from the buffer tanks, blending vessels, UHTs as well as other lab & pilot equipment. system/ tank Step 3. +/- 30 Min. alkaline cleaning at +/- 70°C (depending on the type of detergent) Step 4. +/- 10 Min. cold/ hot water to remove detergents from Automated cleaning of the 50L vessel, CIP pump with high-speed flow up to 2.4mᶾ/hr the equipment Step 5. +/- 30 Min. acid cleaning at +/- 70°C (depending on the type of detergent) Step 6. +/- 15 Min. cold/ hot water to remove detergents from the equipment Step 7. Emptying the tank and pipes

Open the catalog to page 1

OMVE CIP250 Fully Automated Cleaning in Place Unit-2

CIP250 operating in a full production line OMVE Americas Inc. Milton, Canada Tel +1 416 986 8442 De Meern, The Netherlands Tel +31 30 241 00 70 [email protected] Disclaimer: no rights can be derived from the content in this brochure. Version 1/2025

Open the catalog to page 2