Metallic belt conveyors

Product catalog summary

Operating Principles
Metallic belt conveyors are primarily used for transporting chips and metal waste. The system allows liquids and chips to flow on the horizontal section of the conveyor, with liquids being collected at the bottom and chips transported by bars in the bucket. Liquids are recovered through openings on the side or bottom of the conveyor. These conveyors can also be utilized in other applications such as handling sheet falls and parts, with various carpet sizes available depending on the chip section and nature.

Composition
The conveyor structure is made of folded sheet steel with welded bars. For safety, a bonnet cover is installed on the inclined section, and an exit chute is bolted to the conveyor head. The metallic belt consists of two chains with metal rollers connected by plates, assembled with axes pinned at the ends. A motor gear with a torque limiter drives the belt. Additional equipment options include adjustable foot support, a chute on the horizontal part, electric and mechanical safety features, a liquid recovery tank, and a lifting pump.

Technical Data
The technical specifications include various pitch sizes (40, 65, 100, 125) with corresponding width measurements in millimeters. Each pitch size has specific dimensions for width (D) and other parameters (A, B, C, F, H, L, a), which are detailed in the technical data table. These dimensions are crucial for selecting the appropriate conveyor size for specific applications.

Catalog excerpts

Metallic belt conveyors OPERATING Metallic belt conveyors are used for the transport of chips and metal waste. The liquid and chips flows on the horizontal part of the carpet. The liquid is recovered at the bottom of the conveyor, and the chips are taken along by bars in the bucket. The liquid is recovered by openings on the side or at the bottom of the conveyor. The belt conveyors can be also used in other fields (ex: sheet falls, parts...). There are various sizes of carpet: pitch 40, pitch 65, pitch 125, according to the section and the nature of the chips. COMPOSITION The structure is folded sheet steel and welded bars. For safety, a bonnet cover is placed on the inclined part of the conveyor and a chute of exit is bolted on the head of the conveyor. The metallic belt is composed of two chains with metal rollers connected by plates, the whole assembled by axes pinned at the ends. A motor gear, with torque limiter, ensures the drive of the carpet The conveyors can be equipped with : adjustable foot support chute on horizontal part electric safety mechanical safety tank of liquids recovery lifting pump

Open the catalog to page 1

Open the catalog to page 2

Metallic belt conveyors

Metallic belt conveyors

Catalog excerpts

All OMSAT FRANCE catalogs and technical brochures