*mydirectindustry

TL-L

TL-L

Product catalog summary

Overview: The document details the specifications and usage guidelines for the TL-L Ultra-long Sensing-distance Proximity Sensor, capable of detecting both ferrous and non-ferrous substances at a distance of 100 mm. Models are available for underwater use.

Specifications: The TL-L100-7 model features a sensing distance of 100 mm ±10%, with a set distance of 0 to 80 mm and a differential travel of 15% max. It operates on a power supply voltage of 10 to 30 VDC and has a current consumption of 40 mA DC max. The control output is 200 mA DC max. The sensor is protected against reverse polarity and surges, and it operates within a temperature range of −25 to 55°C.

Design Considerations: The sensor should be separated from surrounding metal to avoid interference. When mounting multiple sensors, appropriate spacing is required to prevent mutual interference.

Safety Precautions: The sensor is not designed for safety-critical applications. It should not be used in conditions exceeding its ratings, and it is not suitable for applications involving serious risk to life or property without proper system design.

Warranty and Liability: OMRON provides a one-year warranty against defects in materials and workmanship. The company disclaims any liability for special, indirect, or consequential damages, and the warranty is void if the product is improperly handled or modified.

Application Considerations: Users must ensure the product's suitability for their specific applications, especially in environments with potential chemical contamination or electrical interference. The document advises against using the product in high-risk applications without ensuring proper system design.

Disclaimers: Specifications and accessories may change without notice. Performance data is provided as a guide and does not constitute a warranty.

Catalog excerpts

Detection Distance of 100 mm for Both Ferrous and Non-ferrous Substances. • Ultra long-distance detection of 100 mm for both ferrous and non-ferrous substances. • Models also available for use under water. Be sure to read Safety Precautions on page 4. Ordering Information Note: The TL-L100-10 is also available for use under water (JIS0920: Withstand pressure of 0.39 MPa).

Open the catalog to page 1

Ratings and Specifications Output specifications Influence of Sensing Object Size and Material TL-L100-7

Open the catalog to page 2

TL-L I/O Circuit Diagrams Output configuration Timing chart Output circuit Sensing object Load (between brown and black leads) Output voltage (between black and blue leads) Operation indicator (red) None Operate Reset Present Proximity Sensor main circuit *1. Load current: 200 mA max. *2. When a transistor is connected. Connections Connection to the S3D2 Sensor Controller TL-L100-7 Blue: 0 V Black: Output Brown: 12 VDC The signal input switch on the S3D2 can be used to set reverse operation. Note: 1. Refer to S3D2 for details. S3D2

Open the catalog to page 3

TL-L Safety Precautions Refer to Warranty and Limitations of Liability. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Do not use this product under ambient conditions that exceed the ratings. ● Design Influence of Surrounding Metal Separate the Sensor from surrounding metal as shown below. Influence of Surrounding Metal Mutual Interference When mounting more than one Sensor face-to-face or side-by-side, separate them as shown below. Tolerance class IT16 applies to dimensions in this data sheet unless...

Open the catalog to page 4

Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES...

Open the catalog to page 5

All OMRON catalogs and technical brochures

IoT Flow Sensors/IoT Pressure Sensors
48 Pages
NX1P
41 Pages
J7KCA
18 Pages
CX-Drive
80 Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list