Limit Switch Connectors Connectors (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness of the edges of the conduits, use an SC Connector that is suitable for the external diameter of cable and model of Limit Switch. Ordering Information Connector for Cabtire Cable Conduit Applicable cable Cabtire cable (generalpurpose) JIS B 0202 G½ Cabtire cable (anticorrosive) Cabtire cable Inner diameter (D) of seal rubber 7 mm 9 mm 12.5 mm 14 mm 11 mm 7 mm 9 mm 12.5 mm 14 mm 11 mm 7 mm 9 mm 12.5 mm 14 mm 11 mm External diameter of cable Min. Max. 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm 5.5 mm 7.5 mm 7.5 mm 9.5 mm 11 mm 13 mm 12 mm 14 mm 9 mm 11 mm Applicable model Note: Please use sealling tape with SC Connectors. SC-1M to SC-5M, however, are provided with an O-ring (NBR) and therefore sealing tape is not necessary to ensure a proper seal. Simple Connectors (Not Suitable for Locations Subject to Oil or Water) Conduit Applicable cable Inner diameter (D) of seal rubber External diameter of cable Min. Max. Note: Simple connector are made of resin. If more sealing capability is required, use one of SC-1M to SC-5M, which have metal casings. Models marked with an asterisk (*) however, can only be used with resin connectors.

Limit Switch Connectors Connectors for Cabtire Cable As for models without an O-ring, please use sealing tape with SC Connectors. Metal Models without O-ring G½ SC-21 to 25 Ball head lock nut (brass and nickel plating) Washer (stainless steel) Sealing rubber (nitrile rubber) Connector (brass and nickel plating) Metal Models with O-ring G½ SC-1M to 5M Ball head lock nut (zinc die-cast and zinc plating) Washer (stainless steel) Sealing rubber (nitrile rubber) Metal Models without O-ring ½-14NPT (U.S.-standard screws) SC-1PT to 5PT Sealing rubber (nitrile rubber) Connector (zinc die-cast and zinc...

Limit Switch Connectors SC-@F@ FA Connectors The SC-@F@ is a snap-on connecting model that greatly reduces the time-consuming effort for wiring the Limit Switch. The SC-@F@ is easily and quickly connected or disconnected and its degree of protection is IP67. Ordering Information FA Connector limit Switch Connecting Cable Crimp terminal Voltage Size of specification conduit 125 VDC 250 VAC JIS B 0202 G½ 125 VDC 250 VAC Size of crimp terminal Applicable model Connecting Cables Straight Cable Voltage specification Connections to Sensor I/O Connectors Voltage specification Brown Blue Brown Blue Red...

Limit Switch Connectors Brown (3) M4 crimp terminal Brown (3) M4 crimp terminal Blue (3) M4 crimp terminal Black (3) M4 crimp terminal Note: 1. Each dimension has a tolerance of ±0.4 mm unless otherwise specified. 2. Figures in parentheses are connector pin numbers. Safety Precautions Precautions for Correct Use Conduits Connector for Cabtire Cable/Flexible Tube G½, ½-14NPT To connect a Limit Switch with a connector, insert a rubber ring first and then a washer into the conduit inlet of the switch body, put a rubber seal, washer, and nut in this order onto the tapered part of the connector and...

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR...