*mydirectindustry

Catalogs
OMRON
Portable Power Monitor - Power Sensor Station

Portable Power Monitor - Power Sensor Station

Product catalog summary

Specifications:
The document details specifications for various current transformers (CTs) used in power monitoring, including models ZN-CTS11-5A, ZN-CTS11-50A, ZN-CTS11-100A, ZN-CTS11-200A, and ZN-CTS51-200A. These models cater to different current ranges from 0.03 to 240 A and have specific internal diameters for accommodating various cable sizes.

Procedures:
Data logging is conducted through networks with adjustable monitor settings. It is crucial to stop logging after one cycle of the target device is completed. The system supports automatic range selection and can log data at high speeds, capturing data every 100 ms.

Norms and Standards:
The CTs are designed to operate under specific environmental conditions, with operating temperatures from -20°C to +60°C and storage temperatures from -30°C to +65°C. They comply with insulation resistance and withstand voltage standards to ensure safety and reliability.

Recommendations:
For accurate measurements, it is advised not to connect CTs of different rated currents to the same branch cable. The use of provided software for analyzing electricity consumption and implementing energy-saving measures is recommended.

Key Features:
The power monitoring system supports various circuit types, including single-phase and three-phase systems. It offers features such as momentary power measurement, integrated power consumption logging, and alarm outputs for exceeding power limits. The system is compatible with SD cards for data storage and retrieval.

Additional Information:
The document includes ordering information, listing models and accessories required for setting up the power monitoring system. Guidelines for selecting the appropriate CT unit based on the application are also provided.

Overview:
The document provides a comprehensive guide on equipment and software for monitoring power consumption and environmental conditions in buildings, highlighting the integration of various sensors and monitors for real-time data visualization and energy management.

Key Components:

Compact Power Sensor (KM20-B40-FLK): Measures power consumption in different parts of a building.
Sensor Network Controller (EW700-M20L): Manages data from multiple sensors.
Smart Power Monitor (KM50-C1-FLK, KM50-E1-FLK): Displays synchronized environmental and power data in real-time.
Thermo-Humidity and Differential Pressure Stations: Measure environmental conditions like temperature, humidity, and pressure.
Portable Power Monitor (ZN-CTX21): Allows for easy power logging and monitoring with minimal setup.

Software Features:

Environmental Visualization Software (ZN-SW11-S): Provides real-time display of waveforms and supports integration with other software for enhanced data management.
Data Administration: Automatic data transfer to Excel and email alerts for alarms facilitate easier monitoring and management.

Specifications:

Logging Unit (ZN-CTX21-A): Features a 7-segment LCD display, various recording intervals, and compatibility with SD cards for data storage.
Power Sensor Station (ZN-KMX21-A): Supports multiple power sensors and monitors, with internal and external memory options for data storage.

Installation and Usage:

Easy installation with magnet mounting and no need for external power sources.
Logging starts with a single button press, and data is displayed based on current measurements.

Recommendations:

Use the software for real-time monitoring to identify excess energy usage and improve energy efficiency while maintaining quality standards.
Ensure correct setup of sensors and monitors for accurate data collection and analysis.

Introduction:
This document introduces the new Clamp Type ZN-KMX21, designed to address common concerns in power measurement without the need to stop machinery.

Specifications and Features:
The ZN-KMX21 is a logging unit that simplifies the installation of measuring equipment, making it easier to check power without halting operations, which is beneficial for users who find data collection time-consuming.

Product Improvement Notice:
Specifications are subject to change without notice as part of ongoing product improvement efforts.

Contact Information:
For further information, contact OMRON Corporation or its regional headquarters in the U.S.A., Europe, Asia Pacific, and China. Detailed contact information is provided for each location.

Trademark Information:
Windows is acknowledged as a registered trademark of Microsoft Corporation.

Catalog excerpts

Portable Power Monitor - Power Sensor Station-1

N EW New-generation environmental sensor TM Portable Power Monitor ZN-CTX21 (Logging unit) ZN- CTM (Dedicated CT unit) I do not want to stop the machine to just check power. Power Sensor Station ZN-KMX21 Do you have the concerns about power measurement? vel of electricity con sum he le yt ptio ntif ni ide mm n ca . worksite our at y ely iat ed Easy and Quick "Checking Power" at the Worksite It's troublesome to install the measuring equipment, when you want to check power. It takes time to collect data. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. OMRON Corporation Tokyo, JAPAN Industrial Automation Company Authorized Distributor: Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69-2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Logging unit (actual size) © OMRON Corporation 2012 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Printed in Japan Cat. No. E419-E1-01 0112 Now this Clamp Type is available

Open the catalog to page 1

Portable Power Monitor - Power Sensor Station-2

Open the catalog to page 2

Portable Power Monitor - Power Sensor Station-3

Our Further Proposals on Power Checkup Power is indicated based on CT(current) Minute differential pressure Thermo-Humidity Station Strong Support for Construction of a Monitoring System Differential Pressure Station visualize Extra Energy Electric power For monitoring of the power of an entire building Power Sensor Station What you do is just connecting CT. There is no need for wiring for voltage measurement. Battery-powered, Fixed by Magnet and Ultra-thin Portable Power Monitor ZN-CTX21 Power Sensor Station ZN-KMX21 Environmental Visualization Software This software is recommended for real-time...

Open the catalog to page 3

Portable Power Monitor - Power Sensor Station-4

This single unit solves all the problems you have with power checking at your worksite! Five Types of Dedicated CT units for Various Applications Product name DC cable (A magnet is attached to Model ZN-CTX21-A and Model ZN-KMX21-A.) Data logging through networks is available. Setting of the monitor is also possible. Product name Right angle type (2 m) Environmental Visualization Software * 1* 2 Wave Inspire ES *1 Operating environment/OS: Windows XP/Windows Vista/Windows 7(64-bit is supported for Windows 7 alone) CPU: Intel convertible processor 1 GHz minimum Memory: 1 GB minimum (2 GB or greater...

Open the catalog to page 4

Portable Power Monitor - Power Sensor Station-5

Five Types of Dedicated CT units for Various Applications Clamp type CT is added to the lineup. Four types of split type CTs and a clamp type CT (200A) congure the lineup. The clamp type CT provides easy measurement in locations that are difcult for CTs of other types. Data logging through networks is available. Setting of the monitor is also possible. Clamp type CT is detachable etachable with the single touch of a button. ZN-CTS51-200A Measurment range: 1.2 to 240 A CT inside diameter: 23 dia. DC cable is available for long hours logging. Downsized and less expensive split type CT ZN-CTS11-5A...

Open the catalog to page 5

Portable Power Monitor - Power Sensor Station-6

List of specifications Portable Power Monitor Ordering Information Appearance Logging unit (rating) Product name Logging unit Power supply Dedicated CT unit Product name Branch cable (cable length 1.3 m) Split type CT Connector: For connecting the branch cable Cable length: 0.2 m Clamp type CT Connector: For connecting the branch cable Cable length: 0.2 m Guideline for selecting dedicated CT unit Model Branch cable Model ZN-CTM11-C * Up to three dedicated CTs for branch type are connectable to the branch cable.Be sure, however, not to connect a CT of different rated current.Correct measurement...

Open the catalog to page 6

Portable Power Monitor - Power Sensor Station-7

Open the catalog to page 7

Portable Power Monitor - Power Sensor Station-8

Our Further Proposals on Power Checkup Strong Support for Construction of a Monitoring System For monitoring of the power of an entire building Power Sensor Station Air conditioners Lighting equipment 2F Air conditioners Lighting equipment The attached software easily enables graphic representation of the saved data. A single button operation logs, in block, the data on 31 KM series units. The same software as that for the Portable Power Monitor ZN-CTX21 is attached. It provides graphic representation of the data saved on the SD card and PC with ease. Data on 31 units of KM series for electric...

Open the catalog to page 8

Portable Power Monitor - Power Sensor Station-9

Open the catalog to page 9

All OMRON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list