Group: OMRON
Catalog excerpts
Machine Automation ControllerNX1 Powerful functionality in a compact design Features • Fast and accurate control by synchronizing all machine devices with the PLC and Motion Engines • Three built-in industrial Ethernet ports • OPC UA server functionality UA • Up to 12 axes of control via EtherCAT • Up to 32 local NX I/O Units • DC power supply without battery backup • Fully conforms to IEC 61131-3 standard programming • PLCopen Function Blocks for Motion Control allow users to create complex programs quickly and easily • Direct connection to a database, with no special unit, software, or middleware required (NX102-DD20)
Open the catalog to page 1Machine Automation Controller System Configuration Basic System Configuration Support Software NX Unit configuration NX-series NX102 CPU Unit Built-in EtherNet/IP port 1 Note: When I/O power is supplied from the NX bus to NX Units connected to the CPU Unit, one or more NX-PF Additional I/O Power Supply Units may need to be added. See page 12 for details. EtherNet/IP Built-in EtherNet/IP port 2 Built-in EtherCAT port NX Units CPU Rack EtherCAT Network configuration Slave Terminal Servo Drives/ Encoder input slaves General-purpose slaves
Open the catalog to page 2Machine Automation Controller NX1 Applicable standards Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model. Product name Program capacity Memory capacity for variables 1.5 MB (Retained during power interruption)^ MB (Not retained during power interruption)
Open the catalog to page 3Machine Automation Controller NX1
Open the catalog to page 4Machine Automation Controller NX1
Open the catalog to page 5Machine Automation Controller NX1 Analog Input Units
Open the catalog to page 6Machine Automation Controller NX1 Temperature Control Units
Open the catalog to page 7Machine Automation Controller NX1 Load Cell Input Unit
Open the catalog to page 8Machine Automation Controller NX1 Position Interface: Pulse Output Units
Open the catalog to page 9Machine Automation Controller NX1
Open the catalog to page 10Machine Automation Controller NX1 Safety Input Units
Open the catalog to page 11Machine Automation Controller NX1 Add one or more NX-PF Additional I/O Power Supply Units when I/O power is supplied from the NX bus to NX Units connected to the CPU Unit. Check the table below. Note: Refer to the NX-series NX102 CPU Unit Hardware User's Manual (Cat. No. W593) for the NX Unit power supply system.
Open the catalog to page 12Automation Software Sysmac Studio Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually.Each model of licenses does not include any DVD. Recommended EtherCAT and EtherNet/IP Communications Cables Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT. For EtherNet/IP, required specification for the communications cables varies depending on the baud rate. For 100BASE-TX/10BASE-T, use an STP (shielded twisted-pair)...
Open the catalog to page 13*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m. Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m. For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019). *2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use. Although the LSZH cable is single shielded, its communications and noise characteristics meet the standards. *3. Cables colors are...
Open the catalog to page 14Wire Gauge and Number of Pairs: AWG24, 4-pair Cable *1. HMC-SD1A1 can be used for a CPU Unit with unit version 1.32 or later.
Open the catalog to page 15*1. Includes the End Cover, and does not include projecting parts. *2. Includes the End Cover. The weight of the End Cover is 82 g. *3. Includes an SD Memory Card. The NX Unit power consumption to NX Units is not included. *4. The inrush current that occurs when the supplied power is changed to ON from a continuous OFF state. The inrush current may vary depending on the operating condition and other conditions. Therefore, select fuses, breakers, and external power supply devices that have enough margin in characteristic and capacity, considering the condition under which the devices are...
Open the catalog to page 16Machine Automation Controller NX1 General Specifications *1. Refer to the OMRON website (http://www.ia.omron.com/) or consult your OMRON representative for the most recent applicable standards for each model.
Open the catalog to page 17Machine Automation Controller NX1 Performance Specifications
Open the catalog to page 18Machine Automation Controller NX1
Open the catalog to page 19Machine Automation Controller NX1
Open the catalog to page 20*1. Execution objects and variable tables (including variable names) *2. Memory used for CJ-series Units is included. *3. The value can be set in 1-word increments. The value is included in the total size of variables without a Retain attribute. *4. The value can be set in 1-word increments. The value is included in the total size of variables with a Retain attribute. *5. It is not possible to use the maximum number of words simultaneously for all banks, because the memory capacity for variables with a Retain attribute is limited to 1.5 MB. *6. For terminology, refer to the NJ/NX-series CPU...
Open the catalog to page 21Machine Automation Controller NX1 Function Specifications
Open the catalog to page 22Machine Automation Controller NX1
Open the catalog to page 23Machine Automation Controller NX1
Open the catalog to page 24Machine Automation Controller NX1
Open the catalog to page 25Machine Automation Controller NX1
Open the catalog to page 26*1. Inline ST is supported. (Inline ST is ST that is written as an element in a ladder diagram.) *2. When connected to a CPU rack. *3. Minimum value fulfills all these conditions. • Larger than 5 ms • Constant number multiple of primary periodic task cycle
Open the catalog to page 27Machine Automation Controller NX1 Function Specifications of the Database Connection CPU Units Besides functions of the NX102-DDnn, functions supported by the NX102-DD20 are as follows.
Open the catalog to page 28*1. SQL Server 2014, Oracle Database 12c and PostgreSQL 9.4 are supported by the DB Connection Service Version 1.02 or higher. SQL Server 2016, MySQL 5.7, DB2 11.1 and PostgreSQL 9.5/9.6 are supported by the DB Connection Service Version 1.03 or higher. SQL Server 2017 is supported by the DB Connection Service Version 1.04 or higher. Oracle Database 18c, MySQL Community Edition 8.0 and PostgreSQL 10 are supported by the DB Connection Service Version 2.00 or higher. You cannot use Oracle 10g with the DB Connection Service version 2.00 or higher. *2. Connection to the DB on the cloud is not...
Open the catalog to page 29All Omron Electronics GmbH catalogs and technical brochures
-
TM Collaborative Robot Brochure
15 Pages
-
Collaborative Robots Datasheet
16 Pages
-
New value for control panels
9 Pages
-
Collaborative Robots TM5
14 Pages
-
NYP
14 Pages
-
NYB
13 Pages
-
Industrial PC Platform
5 Pages
-
Industrial Automation Selection 2016
420 Pages
-
Industrial Automation Portfolio 2016
172 Pages
-
Panel Builder Guide 2017
276 Pages
-
Industrial Automation Guide 2017
894 Pages
-
Adept eCobra 600 SCARA robot
2 Pages
-
Adept Product Portfolio
6 Pages
-
Adept Robotics for Packaging
8 Pages
-
Adept Mobile
8 Pages
-
Adept Cobra s800 Inverted
2 Pages
-
Adept Cobra s800
2 Pages
-
Adept Cobra i800
2 Pages
-
Adept Cobra s600
2 Pages
-
Adept Cobra i600
2 Pages
-
Adept Cobra s350
2 Pages
-
Adept Mobile Robots
6 Pages
-
Adept SmartVision EX
2 Pages
-
Adept Quattro s650HS
2 Pages
-
Adept Quattro s800H
2 Pages
-
Adept Quattro s650H
2 Pages
-
Adept T2 Pendant
2 Pages
-
Adept AnyFeeder SX240
2 Pages
-
AdeptSight Guidance
2 Pages
-
Adept DeskTop
2 Pages
-
Adept SmartController CX
2 Pages
-
Adept Product Catalog
5 Pages
-
Adept Viper Family (6-Axis)
6 Pages
-
Adept Cobra Family (SCARA)
12 Pages