*mydirectindustry

Fluoroloy® A49

Product catalog summary

Overview: The document is a material datasheet for Fluoroloy® A49, a proprietary custom PTFE material by Omniseal Solutions. It highlights the material's features, benefits, and typical properties.

Features & Benefits:

Gray color, non-abrasive material.
Superior wear and heat resistance.
Recommended for moderate to high-speed dynamic service against soft metals.
Working temperature range: -268°C to +316°C (-450°F to +600°F).

Physical Properties:

Specific Gravity: 2.13-2.18 (ASTM D792).
Hardness: 50-55 Shore D (ASTM D2240).

Mechanical Properties:

Tensile Strength: 22.1 MPa (3,200 psi) (ASTM D1708).
Elongation: 280% (ASTM D1708).
Tensile Modulus: 800 MPa (116,000 psi) (ASTM D638).
Compressive Stress @ 1% Strain: 4.83 MPa (700 psi) (ASTM D695).
Compressive Modulus: 600 MPa (87,000 psi) (ASTM D695).
Deformation under load, 2000 psi & RT: 9.8% (ASTM D621).

Thermal Properties:

Linear Coefficient of Thermal Expansion (Mold Direction): 11.0x10^-5 mm/mm/°C (6.11x10^-5 in/in/°F) (ASTM D696).
Linear Coefficient of Thermal Expansion (Cross Direction): 10.3x10^-5 mm/mm/°C (5.72x10^-5 in/in/°F) (ASTM D696).

Tribological Properties:

Coefficient of Friction: 0.13 (ASTM D3702).

Notes:

All testing is performed at room temperature unless otherwise specified.
Compression Strength was measured at 1% Strain.
Deformation Under Load was tested at 13.8 MPa (2,000 psi) for 24 hours.
The values are intended for reference only and should not be used as a basis for design specifications or quality control.

Trademark: Fluoroloy® is a registered trademark of Omniseal Solutions.

Catalog excerpts

OmnisealSolutions SAINT-GO BAIN BEYOND the boundaries of possible MATERIAL DATASHEET Fluoroloy® A49 Features & Benefits: Gray color, proprietary custom PTFE, non-abrasive material Superior wear and heat resistance Recommended for moderate to high speed dynamic service running against soft metals Working temperature range: -268°C to +316°C [-450°F to +600°F] Omniseal Solutions

Open the catalog to page 1

All Omniseal Solutions catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list