OmnisealSolutions SAINT-GO BAIN BEYOND the boundaries of possible MATERIAL DATASHEET Fluoroloy® A40 Features & Benefits: Tan color; proprietary custom PTFE; FDA and EU1935/2004 compliant Good wear resistance for medium hardness counterfaces Working temperature range: -260°C to +315°C [-436°F to +600°F] 1. All testing is performed at room temperature unless otherwise specified. 2. Compression Strength was measured at 1% Strain. 3. Deformation Under Load was tested at 13.8 MPa [2,000 psi] for 24 hours. The table above represents typical values, intended for reference only. They should NOT be used as a basis for design specifications or quality control. Fluoroloy® is a registered trademark. © 2025 Omniseal Solutions Omniseal Solutions