OmnisealSolutions SAINT-GO BAIN BEYOND the boundaries of possible MATERIAL DATASHEET Fluoroloy® A19 Features & Benefits: Dark gray color, proprietary custom PTFE, works well in dry, water and lubricating or non-lubricating fluids Excellent heat and chemical resistance, low coefficient of friction Recommended for moderate to low speed Working temperature range: -268°C to +260°C [-450°F to +500°F] 1. All testing is performed at room temperature unless otherwise specified. 2. Compression Strength was measured at 1% Strain. 3. Deformation Under Load was tested at 13.8 MPa [2,000 psi] for 24 hours. The table above represents typical values, intended for reference only. They should NOT be used as a basis for design specifications or quality control. Fluoroloy® is a registered trademark. © 2025 Omniseal Solutions Omniseal Solutions