*mydirectindustry

Fluoroloy® A12

Product catalog summary

Material Overview: Fluoroloy® A12 is a proprietary custom PTFE material characterized by its light brown color and non-abrasive nature. It offers excellent wear and heat resistance, making it suitable for both lubricated and non-lubricated surfaces. It is recommended for moderate to high-speed applications against both soft and hard metals, with a working temperature range from -268°C to +288°C (-450°F to +550°F).

Physical Properties: The specific gravity of Fluoroloy® A12 is 1.95, and it has a hardness of 60 Shore D, as per ASTM D792 and ASTM D2240 test methods, respectively.

Mechanical Properties: The material exhibits a tensile strength of 13.8 MPa (2,000 psi) and an elongation of 180%, according to ASTM D1708. Its compressive stress at 1% strain is 6.89 MPa (1,000 psi), and it shows a deformation under load of 3% when tested at 13.8 MPa (2,000 psi) for 24 hours.

Thermal Properties: Fluoroloy® A12 has a thermal conductivity of 0.247 W/m·°C (1.7 BTU·in/hr·ft²·°F) and is non-flammable as per ASTM D635.

Electrical Properties: The volume resistivity is 8.2x10¹⁸ Ohm-cm, and the surface resistivity is 6.3x10¹⁸ Ohm. The dielectric constant at 1 MHz is 2.4, with a dielectric strength greater than 7.87 MV/m (200 V/mil) and a dissipation factor of 0.015.

Tribological Properties: The coefficient of friction is 0.12, as measured by ASTM D3702.

Notes: All testing is performed at room temperature unless otherwise specified. The values provided are typical and intended for reference only, not for design specifications or quality control. Fluoroloy® is a registered trademark of Omniseal Solutions.

Catalog excerpts

OmnisealSolutions SAINT-GO BAIN BEYOND the boundaries of possible MATERIAL DATASHEET Fluoroloy® A12 Light brown color, proprietary custom PTFE, non-abrasive Excellent wear and heat resistance, performs well against lubricated and non- Features & Benefits: lubricated surfaces Recommended for moderate to high speed service running against soft or hard metals Working temperature range: -268°C to +288°C [-450°F to +550°F] Omniseal Solutions

Open the catalog to page 1

All Omniseal Solutions catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list