*mydirectindustry

Fluoroloy® A06

Product catalog summary

Overview: The document is a material datasheet for Fluoroloy® A06, a proprietary custom PCTFE by Omniseal Solutions. It highlights the material's features, benefits, and typical properties.

Features & Benefits:

Opaque white color with high dielectric strength.
Excellent chemical resistance and extremely low gas permeability.
Does not absorb water, has high compressive strength, and low deformation under load.
Working temperature range from -259°C to +204°C (-434°F to +400°F).

Physical Properties:

Specific Gravity: 2.12 (ASTM D792)
Hardness: 80 Shore D (ASTM D2240)

Mechanical Properties:

Tensile Strength: 34.5 MPa (5,000 psi) (ASTM D1708)
Elongation: 50% (ASTM D1708)
Tensile Modulus: 11,172 MPa (170,000 psi) (ASTM D638)
Compressive Stress @ 1% Strain: 8.96 MPa (1,300 psi) (ASTM D695)
Compressive Modulus: 1,448 MPa (210,000 psi) (ASTM D695)
Deformation under load, 2000 psi & RT: 0.3% (ASTM D621)

Thermal Properties:

Linear Coefficient of Thermal Expansion (Mold Direction): 4.5x10^-5 mm/mm/°C (2.5x10^-5 in/in/°F) (ASTM D696)

Electrical Properties:

Dielectric Constant (Freq. = 1 MHz): 2.3 - 2.5 (ASTM D150)
Dielectric Strength (2.5 mm thick): > 19.69 MV/m (500 V/mil) (ASTM D149)
Dissipation Factor (Freq. = 1 MHz): 0.021 - 0.014 (ASTM D150)

Tribological Properties:

Coefficient of Friction: 0.25 (ASTM D3702)

Notes:

All testing is performed at room temperature unless otherwise specified.
Compression Strength was measured at 1% Strain.
Deformation Under Load was tested at 13.8 MPa (2,000 psi) for 24 hours.
The values are intended for reference only and should not be used as a basis for design specifications or quality control.

Trademark: Fluoroloy® is a registered trademark of Omniseal Solutions.

Catalog excerpts

OmnisealSolutions SAINT-GO BAIN BEYOND the boundaries of possible MATERIAL DATASHEET Fluoroloy® A06 Opaque white color, proprietary custom PCTFE Features & Benefits: High dielectric strength, excellent chemical resistance, extremely low gas permeability and basically does not absorb water High compressive strength and low deformation under load Working temperature range: -259°C to +204°C [-434°F to +400°F] Omniseal Solutions

Open the catalog to page 1

All Omniseal Solutions catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list