Human Machine Interface with 10" TFT LCD display ◆ Features 10" 800x480 TFT LCD Fan-less cooling system Built-in flash memory and RTC NEMA4/IP65 compliant front panel LED Back Light One USB Host and one USB client port SD card slot Power Isolator inside 【Introduction】 The EV8000 series is a new generation of HMI from Omniflex. With the design target of meeting customers’ satisfaction with easy-to-use attributes as before, the EV8000 range not only perform as a Human Machine Interface but can also act as a data exchange center. Through the very popular Ethernet connection, data can be shared among EV8000s without limitation and any SCADA/HMI software on the PC can simply access data from EV8000s. The EV8000 series is the best choice for your future requirement tomorrow. The EV8100i is equipped with a USB 1.1 host, a USB 2.0 high speed device port and an SD card slot. ◆LCD Display Display type Display size (diagonal) Viewing angle (°) Luminance (cd/m2) Backlight Life time Contrast ratio ◆ Touchscreen Type: 4-wire, analog resistive Resolution: continuous Construction: plastic molding housing Light transmission: above 80% Life: 1 million activation minimum CPU and core logic: 32Bit RISC 400MHz processor DRAM: 64 MB DDR2 on board Storage: 128 MB flash memory on board, (User project size: 16MB, Data and Event log size: 48MB) Relative humidity: 10% ~ 90% @ 40°C, non-condensing Shock (operation): 10 to 25Hz(X,Y,Z direction 2G 30minutes) 1 Ethernet port (10/100Base-T) 1 USB 1.1 host 1 USB 2.0 high speed device Sound output: Line out RTC: Built-in Power input: 24±20%VDC,300mA@24VDC Dimension (W x H x D): 271 x 212 x 50mm Weight: 1.4kg Software: EB8000 V2.0.0 or later CE/FCCComplies with EN 55022:2006,Class A EN 61000-3-2:2006 EN 61000-3-3:1995+A1:2001+A2:2005 Front panel meets NEMA4 / IP65

Ordering Information VESA 75mm screw holes c. Fuse d. Power connector e DIP SW & Reset button l Line out MT6000/8000 i series download cable / Mini USB to USB Contact: Omniflex email:[email protected]