Human Machine Interface with 7" TFT LCD display ◆ Features 7" 800x480 TFT LCD Fan-less cooling system Built-in flash memory and RTC NEMA4/IP65 compliant front panel LED Back Light One USB Host and one USB client port SD card slot Power Isolator inside 【Introduction】 The EV8000 series is the new generation of HMI's from Omniflex. With the design target of meeting customers’ satisfaction with easy-to-use attributes as before, an EV8000 not only performs as a Human Machine Interface but can also act as a data exchange center. Through the very popular Ethernet connection, data can be shared among MT8000s without limitation and any SCADA/HMI software on the PC can simply access data from EV8000s. EV8000 series is the best choice for your future HMI requirements. The EV8070iH is equipped with a USB 1.1 host, a USB 2.0 high speed device and SD card slot. ◆LCD Display Display type Display size (diagonal) Backlight Life time Contrast ratio ◆ Touchscreen Type: 4-wire, analog resistive Construction: plastic molding housing Resolution: continuous Light transmission: above 80% CPU and core logic: 32Bit RISC 400MHz processor Life: 1 million activation minimum DRAM: 64 MB DDR2 on board Storage: 128 MB flash memory on board, I/O: 3 serial ports:Com1: RS-232/RS-485 2w/4w, Relative humidity: 10% ~ 90% @ 40°C, non-condensing Shock (operation): 10 to 25Hz(X,Y,Z direction 2G 30minutes) 1 USB 2.0 high speed device Sound output: Line out RTC: Built-in Power input: 24±20%VDC,250mA@24VDC Dimension (W x H x D): 200 x 146 x 42.5mm Weight: 0.85kg Software: EB8000 V2.0.0 or later EN 61000-3-2:2006 EN 61000-3-3:1995+A1:2001+A2:2005 Front panel meets NEMA4 / IP65

Bottom View Front View Rear View Ordering Information a DIP SW & Reset button e Audio MT6000/8000 i series download cable / Mini USB to USB d. VESA 75mm screw holes I Ethernet port (RJ-45) j USB Host port Contact: Omniflex email: [email protected] web:www.omniflex.com