Catalogs >
Omniflex >
Model M1102A PSU

Model M1102A PSU
2Pages

Catalog excerpts

MAXIFLEX 24Vdc Logic Power Supply Module Model M1102A – 24Vdc Logic Power Module. DATASHEET FEATURES • Operate MAXIFLEX systems from 24Vdc Fits in PSU Slot of MAXIFLEX Base Wide input operating range. Power Supply Monitoring for reliable system operation CE certified for international application. Logic Supply Healthy indication The M1102A Power Supply Module is powered from an external +24Vdc (nominal) supply, and provides the primary logic power for a MAXIFLEX I/O Base. This power supply module operates over a wide input voltage range of 20-36Vdc, allowing Maxiflex systems to be operated on 24Volt battery systems. All connections to the module are made via screw terminals located behind the door on the front of the module. These terminals are removable for easy module replacement. SPECIFICATIONS Storage Temperature DC Input Power Source Protection 20-36Vdc 50Watts max. 5A Fuse (Slow Blow) 95% max. at 40°C (104°F) non-condensing. Electronics conformally coated Environmental Protection Logic Supply Outputs Safety Emissions Excluding Packaging Including Packaging POWER (Green) On = Logic Supplies Healthy Ordering Information On = Power Supply has shut down Model Name Maxiflex 24DC L PSU Front Panel Indication Input/Output Terminations Terminal Type Wire Size Screw clamp Plug-in Terminal Blocks 2.5mm2 maximum For manageable wiring to the module, 1.0 mm2 is recommended Electromagnetic Compatibility Impulse Withstand Test Between positive and negative input terminals Between either input terminal and earth Impulse withstand Test Across Inputs 4kV; 1.2us/50us test pulses 1kV; 1.2us/50us test pulses 4kV noise bursts between inputs in accordance with IEC801-4, class IV. Environmental and Safety Operating Temperature Copyright Omniflex ♦ Subject to change without notice

Open the catalog to page 1

MAXIFLEX 24Vdc Logic Power Supply Module Model M1102A – 24Vdc Logic Power Module. ELECTRICAL CONNECTIONS MECHANICAL ARRANGEMENT Wiring access Note: The LED indicators can only be seen when illuminated. Copyright Omniflex ♦ Subject to change without notice

Open the catalog to page 2