Catalogs >
Omniflex >
Model C2361C-0-0 Teleterm M2e

Model C2361C-0-0 Teleterm M2e
6Pages

Catalog excerpts

TELETERM M2 Series Programmable RTU’s Model C2360C-0 and C2361C-0 Teleterm RTU’s DATASHEET • 12 Configurable Inputs and Outputs • 10/100 Ethernet port on C2361C-0 • ISaGRAF 61131-3 Programmable • micro-SD Card Logging • Low power operation • Two serial ports (incl. RS485) FEATURES • Integral Real-Time Clock with Battery Backup 12 Inputs and/or Outputs (Analog or Digital) Programmable for a wide range of applications Wide operating temperature range uSD Memory Card Slot for off-line data logging Compact size for tight spaces On-board temperature sensor and voltage monitor Convenient DIN Rail mounting OVERVIEW The TELETERM M2 is a state-of-the-art RTU designed to expand the possibilities of remote monitoring and control by providing a cost effective platform with a wide range of features. The TELETERM M2 comes with 12 universal I/O that can be configured for analogue or digital input or output according to your needs. The on board RS232/485 port can be used to acquire data from other third party devices using either the Modbus protocol, or by downloading a custom software protocol “plug-in”. This feature allows a wide variety of third party devices to be supported. The low power consumption of the Teleterm M2 makes it suitable for use in solar-powered and battery-powered applications. Teleterm M2 can also be programmed in ISaGraf (selectable option), an industry standard programming environment for all five IEC61131-3 programming languages, providing the ability to do local control, and custom logic. The Teleterm M2 also incorporates an micro SD memory card slot to support local data logging. The Teleterm M2e C2361C-0 is also equipped with 10/100 Ethernet port. Typical applications for the M2 and M2e include: • Energy Management and Remote Meter Reading. Environmental Monitoring Remote Site Monitoring Utilities monitoring Pump Stop and Start Control Reservoir Pump Integrated Control Message Board Ethernet Connection from Plant Stay in touch – Take control with the Teleterm M2 Series from Omniflex. Copyright Omniflex ♦ Subject to change without notice

Open the catalog to page 1

TELETERM M2 Series Programmable RTU’s Model C2360C-0 and C2361C-0 Teleterm RTU’s General Layout 10 / 100 Ethernet Port Programming Port Push before removing card . Only remove card when light is off . Diagnostic Lights (LEDs ) uSD Memory Card Slot Card Eject Button Mechanical Dimensions 109,5 Height including serial cable Copyright Omniflex ♦ Subject to change without notice

Open the catalog to page 2

TELETERM M2 Series Programmable RTU's Model C2360C-0 and C2361C-0 Teleterm RTU's Communication Functions by Model 1. ISAGRAF available with software license. Contact Omniflex office for details. ^SEZS^ Copyright Omniflex ♦ Subject to change without notice _ *^fr%l V*' ffi| Datasheet DSC236xC-0R01 sheet 3 of 6 http://WWW.OITinifleX.com lUWX^^

Open the catalog to page 3

TELETERM M2 Series Programmable RTU’s Model C2360C-0 and C2361C-0 Teleterm RTU’s Input/Output Configurable Options The M2 and M2e are equipped with 12 versatile input/output points (I/O points or IOP’s). Each I/O point can be individually configured from the options given in the following table: I/O Point Digital Input Analogue Input Digital Output Analogue Output Note 1: See the “Specifications” section of this document for detailed specifications of each I/O point option. Note 2: All 0-30V analogue inputs have increased resolution over the range 0-6V (equivalent to the 0-5V inputs). Note...

Open the catalog to page 4

TELETERM M2 Series Programmable RTU’s Model C2360C-0 and C2361C-0 Teleterm RTU’s SPECIFICATIONS Input/Outputs M2 RTU’s have 12 Input/Output Points (IOP configurable in software as analogue or digital, inputs or outputs. (See the table above for a matrix of available functions on each I/O Point.) As an Analogue Input (I/O Points 1,2, 11, 12) Type Voltage Input referenced to 0V supply. 0-30Vdc (software configurable to smaller ranges such as 1-5Volts) < 0.15% of reading +6mV from 0 to 5.5V < 0.15% of reading +30mV from 5.5 to 30V 2mV from 0 to 5.5 Volts nominal (12 bits) 33mV from 5.5 to...

Open the catalog to page 5

TELETERM M2 Series Programmable RTU’s Model C2360C-0 and C2361C-0 Teleterm RTU’s Front Panel Serial Port ( available on all models ) Type Asynchronous serial port Supports the following protocols as standard: • Conet/s • Modbus ASCII (Master or Slave) • Modbus RTU (Master or Slave). • Other protocols written in the EventForth programming language may be downloaded. 300 – 38,400 baud. Baud Rate Maximum cable length Selected by the wiring to the DB9 connector Do not connect Rx Data (In) Tx Data (Out) Do not connect Ground Do not connect RTS (Out) CTS (In) Do not connect Rx Data + (In) Rx Data...

Open the catalog to page 6